Tianjin Huayan Medical Equipment Co., Ltd. Established 2008 · Tianjin China
CNC machining line on the production floor at the Huayan Medical plant in Tianjin
Fumigation Treatment

TCM Fumigation Treatment Machine RH-XZ-B

The RH-XZ-B is a full-cabin TCM fumigation treatment machine combining thermal therapy, steam treatment and external herbal absorption in one enclosed chamber.

Product Overview

What the RH-XZ-B Is Built To Do

The RH-XZ-B is a full-cabin TCM fumigation treatment machine combining thermal therapy, steam treatment and external herbal absorption in one enclosed chamber. Designed for TCM hospitals, acupuncture wards and rehabilitation centres, it directs heated herbal steam across the patient while keeping their head and hands outside the cabinet. Powered by a 2600 W heating system operating on 220 V, the unit heats in under 15 minutes and allows digital temperature control from 1 to 99 degrees Celsius with integrated earth leakage protection and ozone disinfection.

At A Glance
  • Model: RH-XZ-B
  • Brand: Huayan Medical
  • Power supply: AC 220 V, 50 Hz
  • Rated input power: 2600 W
  • Preheating time: < 15 min
  • Adjust angle: Fixation
Key Benefits

Why Buyers Specify the RH-XZ-B

  • External herbal steam therapy delivers active medicine directly through the skin without burdening the stomach or intestines
  • Digital microcomputer console controls cabin heating between 1 and 99 degrees Celsius alongside automated session timing
  • Cabin layout lets the patient rest inside while hands reach out freely during the entire thermal treatment session
  • Fast preheating system brings the steam chamber to operating temperature in less than 15 minutes from startup
  • Built-in ozone disinfection module rated under 25 W sanitises the cabin interior between consecutive patient appointments
  • Integrated earth leakage protection safeguards both the clinical operator and the patient during high-moisture thermal therapy
Problems It Solves
  • Oral administration of strong decoctions can upset sensitive patient digestion and cause gastrointestinal distress
  • Open-basin herbal steaming causes uneven heat loss and fills the clinical treatment room with moisture
  • Manual temperature monitoring on makeshift steam apparatus increases the risk of patient scalding or burns
  • Sanitising therapy cabins between appointments takes excessive staff time without a built-in disinfection system
  • Patients feel confined during thermal therapy when cabinets lack openings for their hands to move freely
Where It Is Used

Where the RH-XZ-B Is Used

Application Scenarios
  • TCM hospital physical therapy department managing pain and blood stasis in chronic outpatient sessions
  • Acupuncture clinic providing herbal steam fumigation to warm the body before or after needle therapy
  • Rehabilitation centre delivering external thermal therapy to relieve regional inflammation and joint stiffness
  • TCM health centre offering whole-body herbal sweat baths to stimulate circulation and metabolic excretion
  • Inpatient therapy ward needing a dedicated enclosed cabin for repeatable non-invasive herbal steam applications
Who It Is For
  • TCM hospital department heads wanting standardised external herbal fumigation instead of open steam basins
  • Acupuncture and rehabilitation clinic owners expanding non-invasive physical therapy options for pain management
  • Rehabilitation directors needing closed-cabin steam units that maintain hygiene with integrated ozone disinfection
  • Medical equipment distributors supplying registered physical therapy devices to overseas TCM and wellness facilities
Technical Features

Inside the RH-XZ-B

  • Microcomputer control system regulating therapy duration and cabin temperature with digital display readout
  • Adjustable cabin temperature range between 1 and 99 degrees Celsius for precise patient comfort control
  • Rapid steam generation system reaching operating readiness in less than 15 minutes of preheating
  • Cabin opening configuration allowing the patient to extend their hands outside the chamber freely
  • Integrated electrical earth leakage protection to guarantee patient safety throughout moist steaming sessions
  • Dedicated ozone disinfection system rated below 25 W for post-treatment chamber sanitisation
  • Fixed treatment cabin geometry measuring 1350 mm in length by 770 mm in width
  • Single-phase AC 220 V 50 Hz power connection with total rated input power of 2600 W
Materials and Build
  • Moulded treatment cabin enclosure designed for wipe-down hygiene and thermal containment during operation
  • Internal electrical heating and ozone sanitation components rated for high-humidity clinical steam environments
Specifications

TCM Fumigation Treatment Machine RH-XZ-B Technical Data

Figures below are taken from the manufacturer data sheet for this model. Tell us your local voltage and dosing practice and we will confirm the build before the order.

ModelRH-XZ-B
BrandHuayan Medical
Power supplyAC 220 V, 50 Hz
Rated input power2600 W
Preheating time< 15 min
Adjust angleFixation
Supply pressureNone
Cabin temperature range1 to 99 degrees Celsius
Ozone disinfection power< 25 W
Height1550 mm
Width770 mm
Length1350 mm
Net weight170 kg
How It Is Made and Checked

How the RH-XZ-B Is Built and Checked

How This Model Is Built and Tested
  • Add the prescribed herbal formula and clean water into the internal steam generator
  • Power on the system and set the target cabin temperature and timer on the digital screen
  • Allow the cabin to preheat to the required treatment level within 15 minutes
  • Position the patient comfortably inside the cabin with hands resting freely through the ports
  • Deliver the controlled fumigation session under microcomputer thermal monitoring until the timer ends
  • Run the ozone disinfection cycle between patient appointments to clean the cabin interior
Quality Control
  • Every unit is fully wired, powered and steam tested before leaving the Tianjin factory
  • Earth leakage protection circuitry and emergency isolation systems are verified during final inspection
  • Manufactured under certified ISO 9001 and ISO 13485 medical equipment quality management systems
  • CE marked to satisfy safety and regulatory benchmarks for export into overseas medical markets
Certification Held By The Plant
ISO 9001ISO 13485CE markingTested as a complete cycle before packing
Customization

Building the RH-XZ-B To Your Practice

  • Factory adjustment for destination electrical requirements outside standard 220 V 50 Hz supply
  • English language control interface screen, labelling and operating documentation supplied upon request
  • Direct technical consultation to integrate the unit into hospital acupuncture and physical therapy suites
Use Guide
  • Position the 170 kg unit on a flat, water-resistant floor with adequate service clearance around the perimeter
  • Connect to a stable AC 220 V 50 Hz electrical circuit with dedicated grounding before initial power up
  • Fill the decoction steam reservoir with appropriate herbal liquid or water as specified by the practitioner
  • Set treatment parameters between 1 and 99 degrees Celsius using the microcomputer display panel
  • Ensure the patient extends hands through designated ports if they wish to handle reading materials or water
  • Wipe clean the cabin floor and activate the ozone cycle after each patient session has concluded
Comparison

How the RH-XZ-B Compares

An honest read on where this model wins and where another one suits you better.

vs Traditional open herbal steam basins
Open basins disperse steam unpredictably into the room, while the RH-XZ-B encloses heat and herbal vapour inside an insulated cabin with digital temperature settings
vs Standard dry heat sauna cabins
Sauna cabins deliver dry or wet thermal sweat therapy but lack dedicated mechanisms for herbal steam delivery, direct pore absorption and ozone sanitisation
Questions Buyers Ask

RH-XZ-B Questions and Answers

What power supply does the RH-XZ-B require?
The machine operates on AC 220 V at 50 Hz with a rated input power of 2600 W. Please verify your facility voltage before ordering.
What is the typical production lead time?
Standard dispatch is generally about 6 days after payment is received via T/T, depending on current production schedule and quantity.
How does the machine disinfect between patients?
It features an integrated ozone disinfection system rated under 25 W that sanitises the enclosed cabin interior between treatment appointments.
Can the patient move their hands during treatment?
Yes. The cabinet structure is designed with open ports so patients can reach their hands out freely throughout the session.
What warranty and replacement parts are provided?
Huayan provides a one-year free warranty from qualified commissioning. Wear parts accompany the shipment, and remote diagnostic video guidance is free.

Ready to price the RH-XZ-B

Send us your local voltage, your session volume and the space you have. A price and a full specification sheet for the RH-XZ-B come back within twelve hours.