100W solar LED emergency light with alloy and ABS housing, 5V8W solar panel on top
Side view of the solar emergency light showing the 180 LED chips and red/blue indicatorFront view of the solar-powered emergency light with multiple brightness modesPackaged unit in carton with 10 pieces, showing dimensions and weightInstallation of the solar emergency light in a corridor with solar panel exposed to sunlight
Solar Emergency Light

100W Solar LED Emergency Light

The FD-ST-100W is a solar-powered emergency light designed for use in areas with unreliable power supply or where backup lighting is required during outages. It features a 5V8W solar panel, a 3.2V/10AH battery, and 180 LED chips for high, half, low, and red/blue light output. The unit is built with an alloy and ABS housing, measures 350*330*55mm, and is shipped in cartons of 10 units. It operates on a 5V cable and can be used in both indoor and outdoor settings where solar charging is feasible.

ModelFD-ST-100W
Dimension350 x 330 x 55 mm
MaterialAlloy + ABS
Solar Panel5V8W
Battery3.2V/10AH
Cable5V
Benefits

Key Benefits

  • Solar charging reduces dependency on mains power during outages
  • 180 LED chips deliver high brightness for emergency visibility
  • Multiple output modes allow flexible lighting levels based on need
  • Red/blue light mode supports emergency signaling or low-visibility conditions
  • Alloy and ABS housing provides durability for indoor and outdoor use
  • 10 units per carton simplifies bulk handling and shipping logistics
Where It Is Used

Application Scenarios

  • Emergency lighting in public buildings with frequent power cuts
  • Outdoor pathways and stairwells in residential or commercial complexes
  • Backup lighting in underground parking areas or corridors
  • Temporary lighting during construction site power failures
  • Signaling and low-light navigation in evacuation routes
Buyers

Who It Is For

  • Facility managers responsible for emergency lighting compliance
  • Contractors installing solar-powered lighting in off-grid or backup scenarios
  • Electrical wholesalers supplying emergency lighting to Middle East and European markets
  • Brand owners sourcing OEM solar emergency lights under their own label
Why It Matters

Problems It Solves

  • Reliance on grid power for emergency lighting fails during outages
  • Frequent battery replacements in non-solar emergency lights increase maintenance cost
  • Lack of multiple brightness levels leads to over-lighting or under-lighting in different conditions
  • Inadequate signaling modes in standard emergency lights during evacuation
  • Bulk shipping inefficiency due to large or irregular packaging
Engineering

Technical Features

  • 5V8W solar panel for consistent daytime charging
  • 3.2V/10AH battery for extended runtime during power loss
  • 180 LED chips for high-output illumination
  • Four lighting modes: high, half, low, and red/blue
  • 5V cable input for stable power delivery
  • Alloy and ABS housing for impact and weather resistance
  • 10 units per carton for efficient shipping and storage
Materials

Materials

  • Alloy housing for structural strength and heat dissipation
  • ABS casing for impact resistance and weather protection
  • 5V cable for stable power transfer from solar panel to battery
  • LED chips for consistent light output across all modes
Production

Manufacturing Process

  • Alloy and ABS housing fabrication and surface treatment
  • Solar panel integration and wiring to battery system
  • LED board assembly with 180 individual chips
  • Battery connection and circuit testing
  • Final assembly and functional testing of all four light modes
  • Packing in cartons of 10 units for shipping
QC

Quality Control

  • Incoming inspection of solar panels, batteries, and LED chips
  • Functional test of all four lighting modes before packing
  • Battery charge and discharge cycle check
  • Stated defective rate below 0.2%
  • Final visual and mechanical inspection before shipment
Compliance

Certification

Only the certification the factory publishes is listed here.

  • CE certificate and report
  • Stated conformity with CE, RoHS and FCC
OEM and ODM

Customisation Options

  • Customer logo printing available, confirmed against an approved sample before production
  • Supply with or without driver based on site requirements
  • OEM and ODM production for buyers selling under their own brand
  • Packaging can be adjusted to match buyer’s carton labeling or branding
Comparison

Compared With the Alternatives

Mains-powered emergency light

Requires grid connection and fails during outages, but has consistent output without solar dependency

Non-solar battery emergency light

Needs manual battery replacement, but has no solar panel and is simpler to install

Low-LED-count emergency light

Fewer LEDs reduce brightness and coverage, but lower cost and power draw

Installation

Use Guide

  • Install the unit in a location with direct sunlight exposure for optimal solar charging
  • Ensure the solar panel is clean and unobstructed to maintain charging efficiency
  • Use the high mode for full emergency illumination, half or low for extended runtime
  • Red/blue mode should be used only for signaling or low-visibility navigation
  • Avoid covering the solar panel during installation to prevent shading
  • Check battery charge status periodically to verify system readiness
FAQ

100W Solar LED Emergency Light Questions

What is the input voltage for this solar emergency light?

The unit operates on a 5V input via the cable connected to the solar panel.

How many LED chips are in this model?

The FD-ST-100W contains 180 LED chips for high-output illumination.

Can the light operate without solar charging?

Yes, the 3.2V/10AH battery stores energy from solar charging and powers the light during outages.

What are the four lighting modes?

The light offers high brightness, half brightness, low brightness, and red/blue signaling modes.

How many units are in one carton?

Each carton contains 10 units of the FD-ST-100W solar emergency light.

Is a sample available before placing a bulk order?

Yes, sample orders are accepted, mixed samples are acceptable, and samples typically ship within 3-5 days.

What is the lead time for mass production?

Mass production is typically 1-2 weeks, with shipping via DHL, UPS, FedEx, or TNT taking 3-5 days in transit.

Request a Quotation for 100W Solar LED Emergency Light

Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.