1528 Square Timber Wood Working Machine Multichip Saw Blade Cut
The 1528 Square Timber Wood Working Machine Multichip Saw Blade Cut is designed for slicing timber into strips with high precision and material efficiency. It uses a 305 mm multichip saw blade with a 1.5 mm thickness and 40 teeth to cut wood strips up to 250 mm wide and 80 mm high. The machine...
Product Overview
The 1528 Square Timber Wood Working Machine Multichip Saw Blade Cut is designed for slicing timber into strips with high precision and material efficiency. It uses a 305 mm multichip saw blade with a 1.5 mm thickness and 40 teeth to cut wood strips up to 250 mm wide and 80 mm high. The machine features an intelligent feeding control system, lateral adjustment of the saw shaft, and continuous feeding capability. It is suitable for wood factories aiming to improve yield and reduce waste during the initial slicing stage.
Key Benefits
- Improves material yield in wood processing by reducing kerf loss with ultra-thin 1.5 mm saw blade
- Intelligent feeding control allows continuous operation without manual intervention
- Saw shaft can be adjusted laterally by 20 mm to maintain alignment during long cuts
- Supports variable cutting heights from 10 mm to 80 mm and widths up to 250 mm
- Feeding speed adjustable from 2.3 to 10 m/min to match different wood types and thicknesses
- Stable and safe operation with automated control and consistent feed rate
Application Scenarios
- A wood factory upgrading from manual or basic sawing to automated strip cutting with higher material recovery
- A board plant needing consistent width and thickness for downstream processing like planing or gluing
- A facility producing custom-sized wood strips where frequent size changes are required
- A production line adding a high-efficiency slicing step before further processing like drying or machining
Who It Is For
- Sawmills and timber processing plants
- Wood board and panel manufacturers
- Custom wood strip producers
- Factories integrating automated slicing into their production chain
Problems It Solves
- Manual or basic sawing leads to inconsistent strip width and high material waste
- Lack of feeding control causes uneven cuts and machine stoppages
- Fixed blade setups require frequent downtime to change tools for different sizes
- Thick saw blades increase kerf loss and reduce usable material yield
- Inadequate lateral adjustment causes blade drift and poor cut quality over time
Technical Features
- Multichip saw blade with 305 mm diameter, 1.5 mm thickness, 1.0 mm gullet depth, 70 mm arbor hole, 40 teeth
- Spindle speed of 3800 r/min for high cutting precision and smooth finish
- Intelligent feeding control system for continuous and stable material input
- Saw shaft lateral adjustment range of 20 mm to maintain alignment during operation
- Adjustable feeding speed from 2.3 to 10 m/min to suit different wood types and thicknesses
- Integrated motor and drive system with 24.75 kW total power for consistent performance
Specifications
| Model | 1528 Square Timber Wood Working Machine |
|---|---|
| Saw Blade Diameter | 305 mm |
| Saw Blade Thickness | 1.5 mm |
| Saw Blade Gullet Depth | 1.0 mm |
| Saw Blade Arbor Hole | 70 mm |
| Saw Blade Teeth Count | 40 T |
| Spindle Speed | 3800 r/min |
| Maximum Cutting Width | 250 mm |
| Cutting Height Range | 10 mm to 80 mm |
| Feeding Speed | 2.3 to 10 m/min |
| Saw Shaft Lateral Adjustment | 20 mm |
| Total Power | 24.75 kW |
| Overall Size | 2600 mm x 950 mm x 1500 mm |
| Weight | 1500 kg |
Values taken from the manufacturer data for this model. Anything not listed is confirmed on request before order.
Materials
- Hardwood and softwood billets or logs
- Timber strips for further processing into boards, panels or custom sizes
- Wood material with moisture content suitable for slicing without splintering
Manufacturing And Process
Step 1
Feed raw timber into the machine using the intelligent feeding system
Step 2
Set the desired cutting height and width based on the target strip size
Step 3
Adjust the saw shaft laterally if needed to align with the material center
Step 4
Start the machine and allow continuous feeding at the selected speed
Step 5
The multichip saw blade cuts the timber into uniform strips with minimal kerf loss
Step 6
Collect the cut strips for downstream processes like planing, drying or assembly
Quality Control
- Saw blade alignment checked before each production run to prevent wobble
- Feeding speed calibrated to match wood density and prevent jamming
- Spindle speed maintained at 3800 r/min for consistent cut quality
- Lateral adjustment verified before long runs to avoid blade drift
- Sample strips inspected for edge smoothness and dimensional accuracy
- Machine tested under load before shipment to confirm stable operation
Customization Options
- Saw blade size and tooth count can be adjusted based on customer material type
- Feeding speed range can be fine-tuned for specific wood species
- Machine can be supplied with different voltage and phase configurations
- Optional side guides or clamping systems can be added for tighter control
Compared With The Alternatives
| Standard Band Saw Machine | The 1528 uses a multichip blade with thinner kerf and higher precision than a band saw, reducing material loss and improving yield |
|---|---|
| Manual Rip Saw | Manual sawing requires constant operator attention, has inconsistent cuts, and cannot maintain continuous feeding like this machine |
| Single Blade Circular Saw | Single blade saws lack lateral adjustment and cannot handle variable thicknesses as effectively as the 1528 with its adjustable shaft |
Use Guide
- Ensure the saw blade is properly installed and secured before starting
- Set the cutting height and width to match the desired strip size before feeding
- Use the lateral adjustment to align the blade with the center of the timber for straight cuts
- Monitor feeding speed to avoid overloading the machine with dense or wet wood
- Clean the blade and feed rollers regularly to prevent resin buildup and maintain cut quality
- Contact us on WhatsApp for the English operation video if the operator is new to multichip saws
1528 Square Timber Wood Working Machine Multichip Saw Blade Cut FAQ
What is the maximum width and height this machine can cut?
Maximum cutting width is 250 mm, and cutting height ranges from 10 mm to 80 mm.
Can I change the blade for different wood types?
Yes, the multichip saw blade can be replaced with a different configuration based on the wood species and desired cut quality.
What is the feeding speed range?
Feeding speed is adjustable from 2.3 to 10 meters per minute.
Is the saw shaft adjustable?
Yes, the saw shaft has a lateral adjustment range of 20 mm to maintain alignment during cutting.
What is the power requirement?
The machine requires 24.75 kW of total power and operates on 380 V three-phase supply.
What is the lead time?
5 to 15 workdays if the machine is in stock, otherwise 15 to 60 workdays depending on quantity and model.
Can you test my wood before I buy?
Yes, free sample testing is available. You cover freight and supply the wood material you plan to cut.
Related Products
025A Full Automatic Saw Blade Grinding Machine
View Details
CYMJ-2 1 Wood Panel Heat Pressing Jointing Machine
View Details
CYMJ-3 2 Wood Panel Heat Pressing Jointing Machine
View Details
2480 Full Automatic Wood Pieces Tenno Connecting Machine
View DetailsGet A Price On The 1528 Square Timber Wood Working Machine Multichip Saw Blade Cut
Send the quantity, the diameters and the material you run. We answer with price, lead time and packing within 24 hours.