Functional Silicone Fluid
Alkyl Modified Dimethicone BL-221
[INCI/CTFA] C12 Alkyl Dimethicone
BL-221 View technical index
Functional Silicone Fluid
Polyether Modified Dimethicone BL-233
[INCI/CTFA] PEG-10 Dimethicone
- Grade code
- BL-233
- Product line
- Functional Silicone Fluid
- Appearance
- Colorless to yellowish, Transparent to translucent liquid
- Viscosity
- 400~1600
- Certification
- ISO 9001 quality system
- Origin
- Hangzhou, Zhejiang, China
Overview
What BL-233 Is
BL-233 is a lipophilic polyether-polydimethylsiloxane which has excellent W/Si and W/O emulsibility. The product has slight characteristic odor.
Synonyms: [INCI/CTFA] PEG-10 Dimethicone
Key benefits
Why Formulators Choose It
- Silicone Surfactantnn
- Main emulsifier for O/W emulsion
- Excellent emulsifying ability; achieving good emulsifying effect without mixing with other emulsifiers
- Wide viscosity range of emulsified continuous oil phase
- Safe and non-toxic; applied for cosmetics
Technical index
Specifications for Polyether Modified Dimethicone BL-233
These are the release values this grade is tested against under our ISO 9001 system. The batch result is issued as a certificate of analysis with the shipment. Any value not listed here is not published — ask and we will measure it rather than guess.
| Appearance | Colorless to yellowish, Transparent to translucent liquid |
|---|---|
| Specific gravity (25℃) | 1.00~1.05 |
| Refractive index (25℃) | 1.4100~1.4300 |
| Viscosity (CS, 25℃) | 400~1600 |
| Flash point(℃, Opened cup) | >200 |
Application scenarios
Where BL-233 Is Used
- As an emulsifier, this product is mainly used in O/W silicone emulsion formulation. For example, it can emulsify Dimethicone, Phenylmethhicone,Hydroxyl silicone oil, Amido Dimethicone, Alkyl Dimethicone, etc, and achieve stable low-viscosity O/W silicone emulsions.
- Mix this product and silicone oil and stir until uniform (System A). Add a small amount of water at one time into System A and stir. It can achieve the initial emulsion like cream. Then continue to add water. At this stage, the amount of water should be adjusted according to the formulation. Add water gradually and stir at the same time. The stable silicone emulsion can be achieved.
- The recommended dosage is 2~10% (according to the total formulation amount).
Who it is for
Industries That Specify This Grade
Matched from this product's own published application text — not from a generic industry list.
Functional Silicone Fluid users
[INCI/CTFA] PEG/PPG-15/10 Dimethicone
Packing
How It Is Supplied
The product is supplied in 50Kg plastic pails and 200Kg plastic pails. Samples are available upon request in bottles.
Storage and transport: The product is non-toxic product. In storage and transportation, prevent from the exposure of moisture, acids, alkalis and other impurities.
Shipments leave from Hangzhou, Zhejiang, China with commercial invoice, packing list, certificate of origin, TDS and SDS prepared before booking.
Comparison
Against Neighbouring Grades
| Grade | Appearance | Headline value |
|---|---|---|
| Polyether Modified Dimethicone BL-233 | Colorless to yellowish, Transparent to translucent liquid | 400~1600 |
| Alkyl Modified Dimethicone BL-221 | Colorless transparent viscous fluid | 2.0-6.0 |
| Alkyl Modified Dimethicone BL-222 | Colorless transparent viscous fluid | 250-500 |
| Amino Modified Dimethicone BL-231 | Colorless to yellowish, Transparent to translucent fluid | 2,500-6,000 |
Related grades
Other Grades in Functional Silicone Fluid
Functional Silicone Fluid
Alkyl Modified Dimethicone BL-222
[INCI/CTFA] C12-18 Alkyl Dimethicone
BL-222 View technical index
Functional Silicone Fluid
Amino Modified Dimethicone BL-231
[INCI/CTFA] PEG/PPG-15/10 Dimethicone
BL-231 View technical index
Functional Silicone Fluid
Phenyl Modified Dimethicone BL-261
[INCI/CTFA] Phenyl Trimethicone
BL-261 View technical index
Related Reading
Answers
Polyether Modified Dimethicone BL-233 — Questions
What is Polyether Modified Dimethicone BL-233?
[INCI/CTFA] PEG-10 Dimethicone
What does Polyether Modified Dimethicone BL-233 look like?
Colorless to yellowish, Transparent to translucent liquid. Typical viscosity is 400~1600. Full values are listed in the technical index above; a certificate of analysis is issued with every shipment.
Where is BL-233 used?
As an emulsifier, this product is mainly used in O/W silicone emulsion formulation. For example, it can emulsify Dimethicone, Phenylmethhicone,Hydroxyl silicone oil, Amido Dimethicone, Alkyl Dimethicone, etc, and achieve stable low-viscosity O/W silicone emulsions. Mix this product and silicone oil and stir until uniform (System A). Add a small amount of water at one time into System A and stir. It can achieve the initial emulsion like cream. Then continue to add water. At this stage, the amount of water should be adjusted according to the formulation. Add water gradually and stir at the same time. The stable silicone emulsion can be achieved.
How is BL-233 supplied?
The product is supplied in 50Kg plastic pails and 200Kg plastic pails. Samples are available upon request in bottles. The product is non-toxic product. In storage and transportation, prevent from the exposure of moisture, acids, alkalis and other impurities.
Can I get a sample of BL-233 before ordering?
Yes. Samples of Polyether Modified Dimethicone BL-233 are available for evaluation. Message us on WhatsApp or email [email protected] with your application, target viscosity or solid content and the trial quantity you need, and we will confirm availability and lead time.
What is the minimum order quantity?
MOQ depends on the pack size you choose — The product is supplied in 50Kg plastic pails and 200Kg plastic pails. Samples are available upon request in bottles.. Tell us your annual volume and we will quote the most economical packing and shipping route from Hangzhou, China.
Quote BL-233
Send your application, the annual volume and the destination port. We return the technical data sheet, the safety data sheet, packing options and a price with lead time from Hangzhou.