Welded O Shape Handbag Handle
A round O shape iron handle at 100 mm inner width, welded closed and then polished so the joint does not show under plating. A visible weld is the usual giveaway on a cheap round handle, and polishing before plating is what hides it. Minimum 500 pieces per colour, 2 to 7 days production.
The round handle with the weld polished out before plating, for bags where the handle is the design.
| Inner Width | 100 mm or custom sizes |
|---|---|
| Material | Iron |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass |
| Typical Use | Bag/purse |
| Minimum Order | 500 pcs/color |
| Production Time | 2 to 7 days |
Problems It Solves
- A handle that flexes under load makes an expensive bag feel hollow
- Welded joints on tubular handles crack at the weld before the plating fails
- Handle inner width that does not match the bag opening leaves the shape distorted
Key Benefits
- Welded and polished joints finished before plating so the seam does not show
- Iron and wooden options for different weights and price points
- Inner width made to your pattern, since a handle is a shape decision not a stock size
Application Scenarios
- Top handles on structured handbags and bucket bags
- Round and O shape handles on fashion totes
- Luggage and flight case grab handles
- Basket and box carry handles
Who It Is For
- Handbag factories developing a signature handle shape
- Luggage and case makers needing a PVC or TPR grab handle
- Leather workshops buying handles in small matched quantities
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Iron frame handles, welded and polished, or wooden handles for a warmer look
- PVC and TPR moulded handles for cases and luggage
- Inner width from about 100 mm upwards, or made to your sample
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Measure the handle by inner width at the widest carry point
- For a structured bag check the handle against the bag opening, not the panel width
- Ask for the same finish on handle, feet and closure so the bag reads as one piece
| Compared with | What changes |
|---|---|
| Leather rolled handle | Leather is softer in the hand but stretches and cannot hold a shaped silhouette |
| Plastic injected handle | Plastic is lighter and cheaper for cases, but has no metal finish for fashion work |
Related Reading
Industries
Solutions
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
Can You Make a Handle to My Own Shape
Yes. Send a sample, a photo or a drawing. Catalogue shapes need no mould fee, and a new shape needs about 7 days of tooling.
Ask for a Sample of the Welded O Shape Handbag Handle
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.