PVC Case and Luggage Handle
A moulded PVC and TPR grab handle for cases, luggage and flight cases, supplied in white, silver or black or to a customised colour. The factory records a 24 hour salt spray test with no rust, corrosion or spots on this line, and lists ANSI, BHMA, EN, MSDS and CE among its documents. Minimum 500 pieces, packed 50 pieces per carton, delivery 5 to 10 workdays after the sample is confirmed.
The only moulded handle here, for hard cases where a metal handle would be too heavy.
| Material | PVC and TPR |
|---|---|
| Finishes | White/Silver/Black or customized |
| Model | YY101 |
| Typical Use | Luggage, suitcase, flight case |
| Minimum Order | 500 pcs |
| Packing | OPP / PC bag 50 pcs/Carton |
| Delivery | 5 to 10 workdays after samples confirmed and deposit received |
| Documents Available | ANSI / BHMA / EN Standards / MSDS / CE |
| Salt Spray Test | 24h No rust / No corrosion / No spots |
Problems It Solves
- A handle that flexes under load makes an expensive bag feel hollow
- Welded joints on tubular handles crack at the weld before the plating fails
- Handle inner width that does not match the bag opening leaves the shape distorted
Key Benefits
- Welded and polished joints finished before plating so the seam does not show
- Iron and wooden options for different weights and price points
- Inner width made to your pattern, since a handle is a shape decision not a stock size
Application Scenarios
- Top handles on structured handbags and bucket bags
- Round and O shape handles on fashion totes
- Luggage and flight case grab handles
- Basket and box carry handles
Who It Is For
- Handbag factories developing a signature handle shape
- Luggage and case makers needing a PVC or TPR grab handle
- Leather workshops buying handles in small matched quantities
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Iron frame handles, welded and polished, or wooden handles for a warmer look
- PVC and TPR moulded handles for cases and luggage
- Inner width from about 100 mm upwards, or made to your sample
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Measure the handle by inner width at the widest carry point
- For a structured bag check the handle against the bag opening, not the panel width
- Ask for the same finish on handle, feet and closure so the bag reads as one piece
| Compared with | What changes |
|---|---|
| Leather rolled handle | Leather is softer in the hand but stretches and cannot hold a shaped silhouette |
| Plastic injected handle | Plastic is lighter and cheaper for cases, but has no metal finish for fashion work |
Related Reading
Industries
Solutions
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
Can You Make a Handle to My Own Shape
Yes. Send a sample, a photo or a drawing. Catalogue shapes need no mould fee, and a new shape needs about 7 days of tooling.
Ask for a Sample of the PVC Case and Luggage Handle
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.