Shiny Rainbow Purse Feet
A rolled iron purse foot in 10 mm, 12 mm and 15 mm diameters with a rainbow plated finish. Rainbow is an iridescent plated layer, so each foot shifts colour with the light rather than showing a printed pattern. Minimum 1,000 pieces, sampling in 1 to 3 days.
The statement foot: rainbow plating on a part most brands leave plain.
| Diameter | 10 mm/12 mm/15 mm |
|---|---|
| Material | Iron |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass |
| Typical Use | Bag/purse |
| Minimum Order | 1000 pcs |
Problems It Solves
- A bag base that touches the floor abrades in weeks and comes back as a warranty claim
- Feet with sharp prongs tear the base lining during assembly
- Plated feet that scratch through to bare metal look worse than no feet at all
Key Benefits
- Rolled dome profile so the contact point is metal, not leather
- Prongs formed to fold flat against the washer without cutting the lining
- Same finish range as the bag's hooks and rings so the base matches the trim
Application Scenarios
- Handbag and tote bases
- Structured purse and clutch corners
- Luggage and hard case bases
- Wooden and rigid presentation boxes
Who It Is For
- Handbag factories reducing base wear on structured bags
- Leather workshops fitting feet by hand on small runs
- Box and case makers needing a plated stud foot
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Stamped iron or die cast zinc alloy body with a rolled top
- Supplied with prongs and washer for punch-and-fold assembly
- Diameters in the 10 mm to 15 mm range for bag bases
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Punch the base and the reinforcement layer together so the prong grips both
- Fold prongs over the washer, not against the leather
- Place feet inside the base seam line so the load goes into the reinforcement
| Compared with | What changes |
|---|---|
| Screw-fit metal foot | A screw foot is serviceable but needs a threaded plate and costs more to fit |
| Plastic base stud | Plastic is cheap and quiet but cannot carry a plated metal finish |
Related Reading
Industries
Solutions
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
How Many Feet Does a Tote Base Need
Four is the normal pattern for a rectangular base, and five with a centre foot for a base longer than about 40 cm. We supply per piece, so you can set your own pattern.
Ask for a Sample of the Shiny Rainbow Purse Feet
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.