Gunmetal and Black Nickel Purse Feet
The same rolled iron foot in 10 mm, 12 mm and 15 mm diameters, finished in shiny gunmetal or black nickel. Dark finishes suit black and navy bases because a scratch shows less than it would on gold. Minimum order 1,000 pieces.
The dark-base option: gunmetal and black nickel for black and navy bag bases.
| Diameter | 10 mm/12 mm/15 mm |
|---|---|
| Material | Iron |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass |
| Typical Use | Bag/purse |
| Minimum Order | 1000 pcs |
Problems It Solves
- A bag base that touches the floor abrades in weeks and comes back as a warranty claim
- Feet with sharp prongs tear the base lining during assembly
- Plated feet that scratch through to bare metal look worse than no feet at all
Key Benefits
- Rolled dome profile so the contact point is metal, not leather
- Prongs formed to fold flat against the washer without cutting the lining
- Same finish range as the bag's hooks and rings so the base matches the trim
Application Scenarios
- Handbag and tote bases
- Structured purse and clutch corners
- Luggage and hard case bases
- Wooden and rigid presentation boxes
Who It Is For
- Handbag factories reducing base wear on structured bags
- Leather workshops fitting feet by hand on small runs
- Box and case makers needing a plated stud foot
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Stamped iron or die cast zinc alloy body with a rolled top
- Supplied with prongs and washer for punch-and-fold assembly
- Diameters in the 10 mm to 15 mm range for bag bases
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Punch the base and the reinforcement layer together so the prong grips both
- Fold prongs over the washer, not against the leather
- Place feet inside the base seam line so the load goes into the reinforcement
| Compared with | What changes |
|---|---|
| Screw-fit metal foot | A screw foot is serviceable but needs a threaded plate and costs more to fit |
| Plastic base stud | Plastic is cheap and quiet but cannot carry a plated metal finish |
Related Reading
Industries
Solutions
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
How Many Feet Does a Tote Base Need
Four is the normal pattern for a rectangular base, and five with a centre foot for a base longer than about 40 cm. We supply per piece, so you can set your own pattern.
Ask for a Sample of the Gunmetal and Black Nickel Purse Feet
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.