Heart Shape Rivet Stud for Bags and Belts
A zinc alloy heart stud rivet in 8 mm to 14 mm cap sizes, plated in silver, gold, rose gold, antique brass, black nickel and black. The zinc casting holds a crisper edge on the heart than a stamped iron cap does, which matters when the stud is repeated along a belt or a collar. Sampling takes 1 to 3 days.
Choose this over the smaller heart stud when the decoration is repeated in a row and the shape has to stay sharp.
| Size | 8 mm/10 mm/12 mm/14 mm and others, custom sizes available |
|---|---|
| Material | Zinc alloy |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass and others |
| Typical Use | Dog Collar, Purse, Wallet, Bag, Backpack, Belt, and others |
| Minimum Order | 1000 pcs(can mix two colors, 500 pcs/color) |
| Sampling Time | 1 to 3 days |
Problems It Solves
- Rivets set with the wrong post length either spin loose or split the cap
- Iron rivets under a scratched plating rust and stain the leather around them
- Decorative studs with a shallow relief lose their shape after plating
Key Benefits
- Cap and post sold as matched sets so the set height is right first time
- Zinc alloy and iron versions so the cost can follow the product's price point
- Shaped caps, including heart profiles, cast deep enough to survive plating
Application Scenarios
- Strap end and handle attachment points on leather bags
- Decorative studding on belts, collars and wallets
- Reinforcement at stress points beside stitching
- Dog collar decoration
Who It Is For
- Leather workshops setting rivets by hand press
- Belt and collar makers using studs as decoration
- Bag factories reinforcing handle and strap joints
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Double cap construction with cap diameters in the 8 mm to 14 mm range
- Zinc alloy or iron body, plated in the full catalogue colour range
- Post length selected to the total material thickness
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Add the thickness of every layer, then choose a post about 1 mm longer
- Use a matched setting die, since a flat punch deforms the cap
- Set one test rivet on a scrap stack before running the batch
| Compared with | What changes |
|---|---|
| Screw rivet | A screw rivet can be opened for service, while a set rivet is permanent and cheaper |
| Stitching alone | Stitching spreads the load but a rivet carries a point load that would otherwise cut thread |
Related Reading
Industries
Solutions
Other Items in Rivets and Studs
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
How Do I Choose the Post Length
Measure the total stack of all layers, then take a post roughly 1 mm longer. Send us the stack thickness and we will pick the post for you.
Ask for a Sample of the Heart Shape Rivet Stud for Bags and Belts
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.