Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks
Coat Rack and Shoe Rack

Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks

Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.

Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks
Product overview

What This Model Is

Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks belongs to the coat rack and shoe rack family and is produced on the same steel-frame line as the rest of the range. The build combines the factory's metal fabrication with its panel and surface work, so the frame and the top come out of one plant to one standard. It is built for h who will reorder the same model rather than chase a new one each season.

Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.

Why buyers specify it

Key Benefits

Bamboo and fabric options

Warmer materials at the same frame cost.

Flat pack with simple assembly

Three to six parts on most models.

A family that merchandises together

Shoe bench, coat stand and rail in the same finish.

Problems it solves

What This Model Is Specified Against

The failure modes in this category are predictable, which means they can be designed out rather than inspected out.

  1. Fabric seats that pull off the frameSeat fixing and fabric tension are set on the line and checked before packing.
  2. Coat stands that tip when loaded on one sideBase weight and foot spread are specified per model so a loaded stand stays upright.
  3. Rust on racks that meet wet shoesPowder coating over prepared steel is the standard build; the coating spec per model is confirmed at quotation.
Application scenarios

Where It Gets Used

Small apartments

Vertical storage where floor area is scarce.

Entryways and mudrooms

Shoes, coats and bags at the door.

Bedrooms

Open clothes rails used as a wardrobe substitute.

Retail and staff areas

Uniform and outerwear storage.

Who it is for

Buyers Who Specify It

  • Home-organisation brands and importers
  • Discount and variety retail buyers
  • Contract buyers fitting out staff changing areas
  • E-commerce sellers in the entryway category
Technical features

Construction

  • Powder-coated steel tube frames
  • Fabric, MDF or bamboo seats and shelves
  • Shoe racks in 2 to 5 tiers
  • Clothes rails with hanging bar and lower shelf
  • Non-marking foot pads
Specifications

What We Can Confirm

Product nameWholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks
CategoryCoat Rack and Shoe Rack
Minimum order quantity100 pieces per model
Design styleModern
ColourCustomized
SizeCustomized
Frame materialPowder-coated steel; grade and gauge confirmed at quotation
Finished dimensionsTBC — confirmed on the specification sheet
Carton size and loading quantityTBC — confirmed on the carton drawing
Net and gross weightTBC — confirmed at quotation
Test reports and certificatesTBC — confirmed per destination market
Country of manufactureChina — Zhangzhou, Fujian

TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.

Materials

What It Is Made Of

Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.

Customisation

What Can Be Changed

  • Colour, where the specification table shows Color: Customized
  • Size, where the specification table shows Size: Customized
  • Carton artwork, barcodes and retail labels to your files
  • Instruction sheet produced to your artwork and languages
  • Buyer-specified variants developed against your drawing, with tooling stated in the quote
Quality control

Where It Gets Checked

  • Incoming steel, panel, glass and fabric checked against the model specification
  • First piece off the line checked against the approved pre-production sample
  • Frames checked flat and square before surface preparation
  • Coating colour and coverage checked against the approved sample
  • Hardware pack counted against the instruction sheet
  • A unit assembled from the carton to confirm fit and instructions
  • Carton, print and handling marks verified before sealing
  • Pre-shipment inspection to the AQL agreed with the buyer
Certifications: certificate and test-report scope is confirmed in writing per model and per destination market. It is not printed on this page because it changes with scheme and scope, and a logo on a web page is not evidence.
Manufacturing process

How This Model Is Produced

Material intake

Steel, panel, glass and fabric received against the model specification.

Cutting and forming

Tube and sheet cut, bent and pressed to the frame drawing.

Welding and assembly

Joints made where the drawing places them, then dressed.

Surface preparation

Parts prepared so the powder coating holds.

Powder coating

Coated on the line, colour matched to the approved sample.

Surface components

Panel, glass, bamboo or upholstered parts fitted and checked against the frame.

Packing

Packed to the signed carton drawing with the specified internal protection.

Inspection and loading

Sampled against the agreed AQL, then loaded to the agreed plan.

Comparison

How It Compares

Against buying frame and surface from two suppliers

Splitting the frame and the surface across two factories means two QC standards and a fit problem nobody owns. Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks is fabricated and fitted in one plant.

Against a shelf product from a trading company

A trading company sells what a factory already made. Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks can be modified in colour and size where the model allows it, because the quote comes from the plant that builds it.

Use guide

Assembly and Care

  • Unpack on the carton itself so the finished surfaces never touch the floor.
  • Check the parts against the parts list before you start; a missing fixing is easier to report before assembly than during it.
  • Assemble on a flat surface and leave every fixing finger-tight until the last one is in place.
  • Tighten in sequence, then stand the unit up and adjust the feet against the floor.
  • Wipe coated surfaces with a damp cloth only; solvent cleaners will dull a powder-coated finish.
Related models

Other Models in This Range

Buyer programmes

E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network

Capabilities

Panel and Glass Components — The surfaces that sit on the frame

Flat-Pack Engineering — Fewer parts fewer steps fewer returns

Export Packing and Logistics — 120 countries of shipping history behind the packing drawing

Related guides

How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.

Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.

Answers

Questions About This Model

Can we get a sample of Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of Home Door Entryway Shoe Racks before ordering?

Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.

Which markets has this type of product been exported to?

Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.

Do these need tools to assemble?

Most models assemble with the supplied Allen key. The instruction sheet is produced per model.

Are shoe bench seats padded?

Padded and unpadded versions both exist. The photo on each product page shows the version we make.

What colours are standard?

Black and white are the most common frame colours in this category. Other colours are quoted as customised on the models that allow it.

Quote Wholesale Custom Size Shoe Rack Organizer Storage Cabinet of

Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.