O60013
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
As a console table, O60013 is built for volume export rather than for one-off domestic sale. It is produced to the approved-sample standard, with the frame checked flat and square before the surface components are fitted. Most enquiries for this model come from c working to a landed-cost target.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Storage options
Lower shelf, drawer or open frame depending on the model.
Finish families
Black, gold, bronze and natural-wood-effect frames to match the rest of the range.
Shallow footprint
Designed for hallways and behind-sofa placement where depth is the constraint.
What This Model Is Specified Against
O60013 is specified against the failure points that actually generate claims in this category.
- Narrow tables that tip forwardFoot depth, frame geometry and the fixing between top and frame are specified so the loaded table stays put against the wall.
- Marble-effect tops that chip at the cornerCorner protection and packing density are set on the packing drawing for the specific top material.
- Drawer runners that stick after shippingRunner type and mounting are fixed per model and inspected on the line before packing.
Where It Gets Used
Behind-sofa placement
A sofa table in an open-plan living room.
Entryways and hallways
Key-drop and lamp placement in a narrow space.
Retail display
Used as a display plinth in store.
Hotel corridors and lobbies
Decorative surfaces that take daily contact.
Buyers Who Specify It
- E-commerce sellers targeting small-apartment buyers
- Retail buyers merchandising an entryway story
- Contract buyers fitting out apartment corridors
- Importers supplying furniture wholesalers
Construction
- Slim powder-coated steel frames
- MDF, melamine or marble-effect tops
- Optional lower shelf or drawer
- Wall-anchor point on selected models
- Knock-down construction
What We Can Confirm
| Model code | O60013 |
|---|---|
| Product name | O60013 |
| Category | Console Table |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on O60013 is specified against the export route the order actually takes.
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. O60013 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Assembly and Care
- Check the carton for transit damage before opening it, and photograph anything visible.
- Sort the hardware pack into its numbered groups before you start.
- Follow the assembly order given — the sequence exists because some fixings become unreachable later.
- Use the anchor point where one is supplied, especially on taller units.
- Avoid dragging the assembled unit across a floor; lift it to move it.
Other Models in This Range
Console Table
O60003
View model
Console Table
O60004
View model
Console Table
O60002
View model
Console Table
O60001
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Questions About This Model
Can we get a sample of O60013 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Do you supply matching mirrors?
Mirrors are not a current catalogue item. Ask the sales team whether a matching item can be sourced for your programme.
Is a wall anchor included?
Anchor provision is model-specific. Tell us the destination market and we confirm what ships in the hardware pack for that model.
What depth are the console tables?
Finished dimensions are confirmed per model on the specification sheet. They are not published in the online catalogue.
Quote O60013
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.