Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame (FAB)
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
This coat or shoe rack, Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame, is one of the 50 models Wanhao currently lists under coat rack and shoe rack. Fabrication, coating and assembly are handled in house, and the finished unit is trial-assembled from the carton before the specification is frozen. The typical buyer is d filling a living room bay with a fixed specification.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Bamboo and fabric options
Warmer materials at the same frame cost.
Flat pack with simple assembly
Three to six parts on most models.
A family that merchandises together
Shoe bench, coat stand and rail in the same finish.
What This Model Is Specified Against
Buyers of coat rack and shoe rack tend to report the same three failures. This is how the specification for Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame answers them.
- Rust on racks that meet wet shoesPowder coating over prepared steel is the standard build; the coating spec per model is confirmed at quotation.
- Fabric seats that pull off the frameSeat fixing and fabric tension are set on the line and checked before packing.
- Coat stands that tip when loaded on one sideBase weight and foot spread are specified per model so a loaded stand stays upright.
Where It Gets Used
Entryways and mudrooms
Shoes, coats and bags at the door.
Bedrooms
Open clothes rails used as a wardrobe substitute.
Retail and staff areas
Uniform and outerwear storage.
Small apartments
Vertical storage where floor area is scarce.
Buyers Who Specify It
- Discount and variety retail buyers
- Contract buyers fitting out staff changing areas
- E-commerce sellers in the entryway category
- Home-organisation brands and importers
Construction
- Powder-coated steel tube frames
- Fabric, MDF or bamboo seats and shelves
- Shoe racks in 2 to 5 tiers
- Clothes rails with hanging bar and lower shelf
- Non-marking foot pads
What We Can Confirm
| Product name | Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame |
|---|---|
| Category | Coat Rack and Shoe Rack |
| Minimum order quantity | 100 pieces per model |
| Design style | Modern |
| Colour | Customized |
| Size | Customized |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Unpack on the carton itself so the finished surfaces never touch the floor.
- Check the parts against the parts list before you start; a missing fixing is easier to report before assembly than during it.
- Assemble on a flat surface and leave every fixing finger-tight until the last one is in place.
- Tighten in sequence, then stand the unit up and adjust the feet against the floor.
- Wipe coated surfaces with a damp cloth only; solvent cleaners will dull a powder-coated finish.
Other Models in This Range
Coat Rack and Shoe Rack
D60011
View model
Coat Rack and Shoe Rack
D60012
View model
Coat Rack and Shoe Rack
D60015
View model
Coat Rack and Shoe Rack
D60013
View model Buyer programmes
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Questions About This Model
What is the lead time for Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Can we get a sample of Modern Household Living Room, Bedroom, Shoe Bench, Storage Bench, with Fabric Sponge Cushion and 2-story Steel Frame before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
What colours are standard?
Black and white are the most common frame colours in this category. Other colours are quoted as customised on the models that allow it.
How much weight does a clothes rail hold?
Hanging load is confirmed per model at quotation. The figure depends on the bar diameter and the frame gauge used on that model.
Can the rack be made wider?
Yes, on models marked Size: Customized. A width change affects the bar span and is confirmed on a sample.
Quote Modern Household Living Room, Bedroom, Shoe Bench, Storage B
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.