L60017
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
L60017 is listed under kids furniture and is quoted per model for container programmes. The build combines the factory's metal fabrication with its panel and surface work, so the frame and the top come out of one plant to one standard. The typical buyer is e filling a kids bay with a fixed specification.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Desk, chair and storage as a set
A complete study corner from one order.
Child-scale versions of proven frames
The same construction as the adult range, sized down.
Bright colour options
Merchandises strongly in a seasonal bay.
What This Model Is Specified Against
A kids furniture item fails in a small number of places. L60017 is specified against those places.
- Finishes that a child will put in their mouthCoating and surface-finish declarations are confirmed per order and per market at quotation.
- Sharp edges and pinch pointsEdge finishing and moving-part clearance are checked on the sample and on the line.
- Units that tip when a child pulls on themBase footprint and anti-tip provision are specified per model against the destination market's expectations.
Where It Gets Used
Nurseries and kindergartens
Contract quantities in a project colour.
Children's bedrooms
Study desk, chair and toy storage.
Back-to-school retail
Seasonal study furniture.
Playrooms
Toy organisers and low storage.
Buyers Who Specify It
- Retail buyers running back-to-school ranges
- Importers supplying children's furniture wholesalers
- Nursery and school procurement
- E-commerce sellers in the children's category
Construction
- Powder-coated steel frames at child scale
- Study desks, chairs, storage units and toy organisers
- Rounded edge finishing
- Bright colour options
- Flat-pack construction
What We Can Confirm
| Model code | L60017 |
|---|---|
| Product name | L60017 |
| Category | Kids Furniture |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. L60017 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. L60017 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Work with two people for anything larger than a side table; a single-handed assembly is where finishes get marked.
- Identify the front and back panels before assembly — the finished face is not always obvious in flat pack.
- Do not over-tighten fixings into panel material; snug is stronger than forced.
- Position the unit before final tightening if it sits against a wall.
- Clean with a soft damp cloth and dry immediately; do not leave standing water on a panel edge.
Other Models in This Range
Kids Furniture
L60006
View model
Kids Furniture
L60008
View model
Kids Furniture
L60005
View model
Kids Furniture
L60004
View model Buyer programmes
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
MOQ Tooling and Sample Costs Explained
Why a 100-piece MOQ is not one number, and how to read a quote that has tooling hidden in the unit price.
Questions About This Model
Can we get a sample of L60017 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
What age range are the desks sized for?
Finished dimensions are confirmed per model. We do not publish an age claim in the catalogue.
Can you supply a matching desk and chair?
Yes. Ordering them together is how the finish is guaranteed to match.
Are anti-tip straps included?
Anti-tip provision is model and market specific. Confirm with the sales team for your market.
Quote L60017
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.