L60005
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
L60005 is part of the kids furniture programme run out of Wanhao's Zhangzhou plant. It is produced to the approved-sample standard, with the frame checked flat and square before the surface components are fitted. The model is aimed at e sourcing a container rather than a pallet.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Child-scale versions of proven frames
The same construction as the adult range, sized down.
Bright colour options
Merchandises strongly in a seasonal bay.
Desk, chair and storage as a set
A complete study corner from one order.
What This Model Is Specified Against
Buyers of kids furniture tend to report the same three failures. This is how the specification for L60005 answers them.
- Finishes that a child will put in their mouthCoating and surface-finish declarations are confirmed per order and per market at quotation.
- Sharp edges and pinch pointsEdge finishing and moving-part clearance are checked on the sample and on the line.
- Units that tip when a child pulls on themBase footprint and anti-tip provision are specified per model against the destination market's expectations.
Where It Gets Used
Children's bedrooms
Study desk, chair and toy storage.
Back-to-school retail
Seasonal study furniture.
Playrooms
Toy organisers and low storage.
Nurseries and kindergartens
Contract quantities in a project colour.
Buyers Who Specify It
- Retail buyers running back-to-school ranges
- Importers supplying children's furniture wholesalers
- Nursery and school procurement
- E-commerce sellers in the children's category
Construction
- Powder-coated steel frames at child scale
- Study desks, chairs, storage units and toy organisers
- Rounded edge finishing
- Bright colour options
- Flat-pack construction
What We Can Confirm
| Model code | L60005 |
|---|---|
| Product name | L60005 |
| Category | Kids Furniture |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against buying frame and surface from two suppliers
Splitting the frame and the surface across two factories means two QC standards and a fit problem nobody owns. L60005 is fabricated and fitted in one plant.
Against a shelf product from a trading company
A trading company sells what a factory already made. L60005 can be modified in colour and size where the model allows it, because the quote comes from the plant that builds it.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Kids Furniture
L60009
View model
Kids Furniture
L60006
View model
Kids Furniture
L60008
View model
Kids Furniture
L60004
View model Buyer programmes
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
MOQ Tooling and Sample Costs Explained
Why a 100-piece MOQ is not one number, and how to read a quote that has tooling hidden in the unit price.
Questions About This Model
Can we get a sample of L60005 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
What age range are the desks sized for?
Finished dimensions are confirmed per model. We do not publish an age claim in the catalogue.
Can you supply a matching desk and chair?
Yes. Ordering them together is how the finish is guaranteed to match.
Are anti-tip straps included?
Anti-tip provision is model and market specific. Confirm with the sales team for your market.
Quote L60005
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.