L60007
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
L60007 sits in the kids furniture section of the Wanhao catalogue and is built to order for export programmes. Fabrication, coating and assembly are handled in house, and the finished unit is trial-assembled from the carton before the specification is frozen. The model is aimed at i sourcing a container rather than a pallet.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Desk, chair and storage as a set
A complete study corner from one order.
Child-scale versions of proven frames
The same construction as the adult range, sized down.
Bright colour options
Merchandises strongly in a seasonal bay.
What This Model Is Specified Against
Buyers of kids furniture tend to report the same three failures. This is how the specification for L60007 answers them.
- Units that tip when a child pulls on themBase footprint and anti-tip provision are specified per model against the destination market's expectations.
- Finishes that a child will put in their mouthCoating and surface-finish declarations are confirmed per order and per market at quotation.
- Sharp edges and pinch pointsEdge finishing and moving-part clearance are checked on the sample and on the line.
Where It Gets Used
Nurseries and kindergartens
Contract quantities in a project colour.
Children's bedrooms
Study desk, chair and toy storage.
Back-to-school retail
Seasonal study furniture.
Playrooms
Toy organisers and low storage.
Buyers Who Specify It
- Nursery and school procurement
- E-commerce sellers in the children's category
- Retail buyers running back-to-school ranges
- Importers supplying children's furniture wholesalers
Construction
- Powder-coated steel frames at child scale
- Study desks, chairs, storage units and toy organisers
- Rounded edge finishing
- Bright colour options
- Flat-pack construction
What We Can Confirm
| Model code | L60007 |
|---|---|
| Product name | L60007 |
| Category | Kids Furniture |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. L60007 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on L60007 is fixed per the drawing and held for the life of the order.
Assembly and Care
- Check the carton for transit damage before opening it, and photograph anything visible.
- Sort the hardware pack into its numbered groups before you start.
- Follow the assembly order given — the sequence exists because some fixings become unreachable later.
- Use the anchor point where one is supplied, especially on taller units.
- Avoid dragging the assembled unit across a floor; lift it to move it.
Other Models in This Range
Kids Furniture
L60006
View model
Kids Furniture
L60008
View model
Kids Furniture
L60005
View model
Kids Furniture
L60004
View model Buyer programmes
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
MOQ Tooling and Sample Costs Explained
Why a 100-piece MOQ is not one number, and how to read a quote that has tooling hidden in the unit price.
Questions About This Model
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Is L60007 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
What age range are the desks sized for?
Finished dimensions are confirmed per model. We do not publish an age claim in the catalogue.
Can you supply a matching desk and chair?
Yes. Ordering them together is how the finish is guaranteed to match.
Are anti-tip straps included?
Anti-tip provision is model and market specific. Confirm with the sales team for your market.
Quote L60007
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.