K60002
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
K60002 sits in the metal bed section of the Wanhao catalogue and is built to order for export programmes. It is produced to the approved-sample standard, with the frame checked flat and square before the surface components are fitted. It fits programmes run by h where consistency between shipments matters more than novelty.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Replacement parts to the same drawing
Spares can be ordered against the original model.
Single, double, bunk and loft formats
One supplier across a whole accommodation block.
Flat pack and stackable
Contract quantities load efficiently.
What This Model Is Specified Against
The problems below are the ones that turn a metal bed order into a customer-service case. Each one is a build decision on this model.
- Replacement parts that are no longer availableFrame parts are produced to a fixed drawing, so a replacement rail ordered later fits the bed you already have.
- Bunk beds that move when someone climbs inPost-to-rail joints and the ladder fixing are specified for repeated dynamic load, not just static load.
- Coating chipped at contact pointsHigh-contact areas are identified per model and protected in the carton.
Where It Gets Used
Hotels and hostels
Durable frames with a simple look.
Student dormitories
Bunk and single frames at contract quantity.
Value retail bedroom
Entry-price bed frames.
Worker accommodation
High-cycle use with replaceable parts.
Buyers Who Specify It
- Value retail and e-commerce sellers
- Labour-accommodation and site-camp contractors
- Hotel and hostel procurement
- Student accommodation and dormitory buyers
Construction
- Powder-coated steel tube frames
- Single, double, bunk and loft configurations
- Ladder and guard rail on bunk models
- Knock-down construction for container loading
- Replacement parts produced to the original drawing
What We Can Confirm
| Model code | K60002 |
|---|---|
| Product name | K60002 |
| Category | Metal Bed |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. K60002 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on K60002 is fixed per the drawing and held for the life of the order.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Metal Bed
K60003
View model
Metal Bed
K60006
View model
Metal Bed
K60007
View model
Metal Bed
K60008
View model Buyer programmes
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Related guides
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Choosing Bed Frames for Hotel and Dormitory Projects
What separates a contract bed from a retail bed, and the four specification points a tender should name.
Questions About This Model
Can you produce K60002 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
How is K60002 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
What tube diameter and wall thickness do you use?
Tube specification is fixed per model and confirmed on the spec sheet. It is not published because it changes between the retail and contract versions of the same bed.
Can we order beds in a project colour?
Yes. Project colours are standard practice on contract orders where the quantity supports a coating batch.
How are bed frames packed for a container?
Frames ship knocked down. The loading plan is confirmed in writing once the carton drawing is agreed.
Quote K60002
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.