I60094
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
I60094 is part of the night stand programme run out of Wanhao's Zhangzhou plant. The metal structure is made in the factory's own press and welding shops, then coated on the line shown in the workshop photographs on this site. It is specified most often by e who need a repeatable model rather than a one-season buy.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Matches the bed range
Same frame colours, same finish families.
One to three drawer formats
Covers the price points a bedroom bay needs.
Fabric-bin versions
A lower price tier on the same frame.
What This Model Is Specified Against
Every point below is a decision taken before production on I60094, not a check added afterwards.
- Tops that mark from a water glassTop surface material is specified per model; the photo on each product page shows the finish supplied.
- Finish drift between the bed and the bedsideWhen bed and bedside are ordered together they are coated in the same batch.
- Drawers that stick in humid climatesRunner type and clearance are specified for the destination climate where the buyer tells us what it is.
Where It Gets Used
Hotel rooms
Compact bedside storage.
Bedrooms in retail ranges
Sold beside the bed as a set.
Small apartments
Narrow bedsides for tight bed-to-wall gaps.
Student rooms
Low-cost bedside storage that stacks in transit.
Buyers Who Specify It
- Hotel and apartment buyers
- Retail buyers completing a bedroom set
- Importers building bedroom assortments
- E-commerce sellers listing bedside tables
Construction
- Powder-coated steel frames
- MDF or melamine bodies, or non-woven fabric bins
- One, two and three drawer formats
- Open-shelf versions on selected models
- Knock-down construction
What We Can Confirm
| Model code | I60094 |
|---|---|
| Product name | I60094 |
| Category | Night Stand |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on I60094 is fixed per the drawing and held for the life of the order.
Against buying frame and surface from two suppliers
Splitting the frame and the surface across two factories means two QC standards and a fit problem nobody owns. I60094 is fabricated and fitted in one plant.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Night Stand
I60013
View model
Night Stand
I60010
View model
Night Stand
I60004
View model
Night Stand
I60012
View model Buyer programmes
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
Choosing Bed Frames for Hotel and Dormitory Projects
What separates a contract bed from a retail bed, and the four specification points a tender should name.
Upholstered Bed Fabric and Storage Options
What to specify on a fabric bed so the second container matches the first.
Questions About This Model
Is I60094 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
Can you produce I60094 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
What is the height of the night stands?
Finished dimensions are confirmed per model at quotation.
Can a night stand be ordered without the bed?
Yes. It is quoted as its own model with its own MOQ.
Can you match a night stand to a bed we already bought?
If the bed was produced by Wanhao we can match it against the original order. Matching another factory's finish needs a physical sample and a colour approval.
Quote I60094
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.