I60046
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
I60046 is part of the cabinet programme run out of Wanhao's Zhangzhou plant. The build combines the factory's metal fabrication with its panel and surface work, so the frame and the top come out of one plant to one standard. It is specified most often by c who need a repeatable model rather than a one-season buy.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Steel frame with panel carcase
Metal strength where it carries load, panel where it shows.
Flat-pack packing
Cuts CBM against an assembled cabinet of the same footprint.
Rigid or fabric-bin drawers
Two price points from one frame family.
What This Model Is Specified Against
The problems below are the ones that turn a cabinet order into a customer-service case. Each one is a build decision on this model.
- Carcase racking under loadBack-panel fixing and frame bracing are specified per model so a loaded cabinet stays square.
- Drawers that sagRunner type, drawer base thickness and rail fixing are set per model and checked on the line.
- Cartons that fail on a palletCarton board grade and internal protection are agreed on the packing drawing before production.
Where It Gets Used
Home office
Under-desk and beside-desk storage.
Student and staff accommodation
Low-cost, replaceable storage.
Bedroom and hallway storage
Drawer towers and fabric-bin units.
Living room storage bays
Sideboards and TV units.
Buyers Who Specify It
- Contract buyers fitting out staff and student rooms
- E-commerce sellers in the storage category
- Importers supplying home-organisation ranges
- Chain retail buyers running storage promotions
Construction
- Powder-coated steel frames with panel carcases
- Rigid drawers or non-woven fabric bins
- Melamine-faced or MDF panel surfaces
- Knock-down construction with numbered hardware
- Back panel fixed for rigidity on floor-standing models
What We Can Confirm
| Model code | I60046 |
|---|---|
| Product name | I60046 |
| Category | Cabinet |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. I60046 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on I60046 is fixed per the drawing and held for the life of the order.
Assembly and Care
- Check the carton for transit damage before opening it, and photograph anything visible.
- Sort the hardware pack into its numbered groups before you start.
- Follow the assembly order given — the sequence exists because some fixings become unreachable later.
- Use the anchor point where one is supplied, especially on taller units.
- Avoid dragging the assembled unit across a floor; lift it to move it.
Other Models in This Range
Cabinet
I60096
View model
Cabinet
I60068
View model
Cabinet
I60097
View model
Cabinet
I60069
View model Buyer programmes
Office and Workspace Suppliers — Home-office volume, training-room flexibility
Capabilities
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
Related guides
Shelving Load Capacity and the Questions Buyers Should Ask
Why a single load figure on a catalogue page tells you almost nothing about a shelf.
A Pre-Shipment Inspection Checklist for Furniture Orders
What a useful furniture inspection actually looks at, in the order it should look at it.
Questions About This Model
How is I60046 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
What is the lead time for I60046?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Can we order a cabinet in our own decor?
Yes, on the models marked Color: Customized, subject to decor availability and sample approval.
Is assembly hardware included?
Yes. Every knock-down model ships with a numbered hardware pack and an instruction sheet.
What board thickness is used in the carcase?
Board thickness is a per-model specification confirmed on the spec sheet, not a catalogue value.
Quote I60046
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.