I60038
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
I60038 is part of the night stand programme run out of Wanhao's Zhangzhou plant. The build combines the factory's metal fabrication with its panel and surface work, so the frame and the top come out of one plant to one standard. It is built for e who will reorder the same model rather than chase a new one each season.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
One to three drawer formats
Covers the price points a bedroom bay needs.
Fabric-bin versions
A lower price tier on the same frame.
Matches the bed range
Same frame colours, same finish families.
What This Model Is Specified Against
A night stand fails in a small number of places. I60038 is specified against those places.
- Finish drift between the bed and the bedsideWhen bed and bedside are ordered together they are coated in the same batch.
- Drawers that stick in humid climatesRunner type and clearance are specified for the destination climate where the buyer tells us what it is.
- Tops that mark from a water glassTop surface material is specified per model; the photo on each product page shows the finish supplied.
Where It Gets Used
Small apartments
Narrow bedsides for tight bed-to-wall gaps.
Student rooms
Low-cost bedside storage that stacks in transit.
Hotel rooms
Compact bedside storage.
Bedrooms in retail ranges
Sold beside the bed as a set.
Buyers Who Specify It
- Hotel and apartment buyers
- Retail buyers completing a bedroom set
- Importers building bedroom assortments
- E-commerce sellers listing bedside tables
Construction
- Powder-coated steel frames
- MDF or melamine bodies, or non-woven fabric bins
- One, two and three drawer formats
- Open-shelf versions on selected models
- Knock-down construction
What We Can Confirm
| Model code | I60038 |
|---|---|
| Product name | I60038 |
| Category | Night Stand |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. I60038 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. I60038 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Night Stand
I60013
View model
Night Stand
I60010
View model
Night Stand
I60004
View model
Night Stand
I60012
View model Buyer programmes
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
Choosing Bed Frames for Hotel and Dormitory Projects
What separates a contract bed from a retail bed, and the four specification points a tender should name.
Upholstered Bed Fabric and Storage Options
What to specify on a fabric bed so the second container matches the first.
Questions About This Model
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Is I60038 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
Is there a version with a power socket?
Not in the current catalogue. Ask the sales team whether it can be developed for your programme.
Are drawer runners metal or wooden?
Runner type is specified per model and confirmed on the spec sheet.
What is the height of the night stands?
Finished dimensions are confirmed per model at quotation.
Quote I60038
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.