Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table is part of the living room furniture programme run out of Wanhao's Zhangzhou plant. Steel forming, coating and final assembly all happen at the same site, which is what keeps a repeat run matching the first one. The typical buyer is r filling a living room bay with a fixed specification.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Colour and size on request
Frame colour, panel decor and finished size are open for customisation on the models marked Customized.
One factory for frame and panel
Steel fabrication and panel cutting sit in the same plant, so a mixed steel-and-MDF product does not need a second supplier or a second QC standard.
Built for flat pack
Most models ship knocked down with a hardware pack and an instruction sheet, which keeps CBM down and damage claims low.
What This Model Is Specified Against
These are the issues raised most often on living room furniture programmes, and the build answer to each.
- Ranges that look inconsistent on the shelfFrame colour, panel decor and hardware finish are matched across a family of models so a coffee table, side table and console table read as one collection.
- Frames that loosen after the customer assembles themTube wall thickness, weld placement and fixing hardware are set per model and held for the life of the order, so the third production run assembles like the first one.
- Finish damage between the coating line and the shelfPowder-coated parts are packed with the contact faces protected; panel and glass parts get corner protection specified on the packing drawing.
Where It Gets Used
Rental and serviced apartments
Hard-wearing, easy-to-replace occasional furniture.
E-commerce listings
Single-carton products that ship on a parcel network.
Retail home ranges
Seasonal living room promotions for chain and discount retail.
Furniture wholesalers
Assorted containers combining tables, racks and storage.
Buyers Who Specify It
- Furniture importers and wholesalers restocking mixed containers
- Retail chain and discounter buyers running seasonal home ranges
- Home-furnishing brands developing a private-label living room line
- E-commerce sellers who need flat-pack cartons that pass drop tests
Construction
- Powder-coated steel tube or sheet frames
- MDF, melamine-faced board or tempered glass tops depending on model
- Knock-down construction with a numbered hardware pack
- Adjustable levelling feet on most floor-standing models
- Modern, industrial and Nordic finish families
What We Can Confirm
| Product name | Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table |
|---|---|
| Category | Living Room Furniture |
| Minimum order quantity | 100 pieces per model |
| Design style | Modern |
| Colour | Customized |
| Size | Customized |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table is fixed per the drawing and held for the life of the order.
Against buying frame and surface from two suppliers
Splitting the frame and the surface across two factories means two QC standards and a fit problem nobody owns. Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table is fabricated and fitted in one plant.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Living Room Furniture
New Design Manufacturer Wholesale Glass Top Coffee Table With Wooden Tray
View model
Living Room Furniture
New Arrival Modern Coffee Table Set Living Room Furniture for Combination Design Coffee Tables
View model
Living Room Furniture
Free Sample 2 Tiers Marble Coffee Table Rectangle Design for Living Room Marble Coffee Table
View model
Living Room Furniture
New Arrival Iron Foot Black Marble Top Coffee Table for Square Design Coffee Table
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Questions About This Model
Is Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
Can you produce Coffee Table New Design Small Tray Nordic Living Room Furniture Side Round Table Hot Selling Luxury Small Coffee Table in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
Do you supply test reports for these products?
Available test reports are confirmed per model and per destination market at quotation. Tell us which standard your market requires and we will confirm in writing what we can supply.
Do these ship assembled or flat packed?
Most living room models ship knocked down in a single carton with hardware and instructions. Confirm the packing method per model with the sales team before you cost the freight.
Can we change the size of a table or rack?
Yes, on the models marked Size: Customized. Tooling and sample cost depends on how far the new size moves from the existing frame.
Quote Coffee Table New Design Small Tray Nordic Living Room Furnit
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.