Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs sits in the console table section of the Wanhao catalogue and is built to order for export programmes. Fabrication, coating and assembly are handled in house, and the finished unit is trial-assembled from the carton before the specification is frozen. Most enquiries for this model come from i working to a landed-cost target.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Storage options
Lower shelf, drawer or open frame depending on the model.
Finish families
Black, gold, bronze and natural-wood-effect frames to match the rest of the range.
Shallow footprint
Designed for hallways and behind-sofa placement where depth is the constraint.
What This Model Is Specified Against
The problems below are the ones that turn a console table order into a customer-service case. Each one is a build decision on this model.
- Marble-effect tops that chip at the cornerCorner protection and packing density are set on the packing drawing for the specific top material.
- Drawer runners that stick after shippingRunner type and mounting are fixed per model and inspected on the line before packing.
- Narrow tables that tip forwardFoot depth, frame geometry and the fixing between top and frame are specified so the loaded table stays put against the wall.
Where It Gets Used
Entryways and hallways
Key-drop and lamp placement in a narrow space.
Retail display
Used as a display plinth in store.
Hotel corridors and lobbies
Decorative surfaces that take daily contact.
Behind-sofa placement
A sofa table in an open-plan living room.
Buyers Who Specify It
- Retail buyers merchandising an entryway story
- Contract buyers fitting out apartment corridors
- Importers supplying furniture wholesalers
- E-commerce sellers targeting small-apartment buyers
Construction
- Slim powder-coated steel frames
- MDF, melamine or marble-effect tops
- Optional lower shelf or drawer
- Wall-anchor point on selected models
- Knock-down construction
What We Can Confirm
| Product name | Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs |
|---|---|
| Category | Console Table |
| Minimum order quantity | 100 pieces per model |
| Design style | Modern |
| Colour | Customized |
| Size | Customized |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Console Table
O60003
View model
Console Table
O60004
View model
Console Table
O60002
View model
Console Table
O60001
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Questions About This Model
How is Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
What is the lead time for Classic Design Glass Top Hallway Console Table Simple Modern With Metal Console Table Legs?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Do you supply matching mirrors?
Mirrors are not a current catalogue item. Ask the sales team whether a matching item can be sourced for your programme.
Is a wall anchor included?
Anchor provision is model-specific. Tell us the destination market and we confirm what ships in the hardware pack for that model.
What depth are the console tables?
Finished dimensions are confirmed per model on the specification sheet. They are not published in the online catalogue.
Quote Classic Design Glass Top Hallway Console Table Simple Modern
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.