Classic Bed Frame
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Classic Bed Frame is produced at Wanhao's plant in Zhangzhou as part of the metal bed range. Construction follows the same route as the rest of the range: steel parts cut, formed and coated in house, then matched to the panel, glass or upholstered components before packing. It fits programmes run by s where consistency between shipments matters more than novelty.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Single, double, bunk and loft formats
One supplier across a whole accommodation block.
Flat pack and stackable
Contract quantities load efficiently.
Replacement parts to the same drawing
Spares can be ordered against the original model.
What This Model Is Specified Against
Classic Bed Frame is specified against the failure points that actually generate claims in this category.
- Replacement parts that are no longer availableFrame parts are produced to a fixed drawing, so a replacement rail ordered later fits the bed you already have.
- Bunk beds that move when someone climbs inPost-to-rail joints and the ladder fixing are specified for repeated dynamic load, not just static load.
- Coating chipped at contact pointsHigh-contact areas are identified per model and protected in the carton.
Where It Gets Used
Student dormitories
Bunk and single frames at contract quantity.
Value retail bedroom
Entry-price bed frames.
Worker accommodation
High-cycle use with replaceable parts.
Hotels and hostels
Durable frames with a simple look.
Buyers Who Specify It
- Student accommodation and dormitory buyers
- Value retail and e-commerce sellers
- Labour-accommodation and site-camp contractors
- Hotel and hostel procurement
Construction
- Powder-coated steel tube frames
- Single, double, bunk and loft configurations
- Ladder and guard rail on bunk models
- Knock-down construction for container loading
- Replacement parts produced to the original drawing
What We Can Confirm
| Product name | Classic Bed Frame |
|---|---|
| Category | Metal Bed |
| Minimum order quantity | 100 pieces per model |
| Design style | Modern |
| Colour | Customized |
| Size | Customized |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. Classic Bed Frame carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. Classic Bed Frame is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Metal Bed
K60003
View model
Metal Bed
K60006
View model
Metal Bed
K60007
View model
Metal Bed
K60008
View model Buyer programmes
Hospitality and Contract Projects — Project colours, repeat parts, replaceable components
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Choosing Bed Frames for Hotel and Dormitory Projects
What separates a contract bed from a retail bed, and the four specification points a tender should name.
Questions About This Model
What is the lead time for Classic Bed Frame?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Can we get a sample of Classic Bed Frame before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
How are bed frames packed for a container?
Frames ship knocked down. The loading plan is confirmed in writing once the carton drawing is agreed.
Do bunk beds meet EN 747?
Standards compliance is confirmed per model and per market at quotation. Tell us which standard your tender requires before you specify the bed.
Are mattresses supplied with the frames?
No. Wanhao supplies frames only.
Quote Classic Bed Frame
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.