C60040
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
C60040 is listed under shelf and is quoted per model for container programmes. Like the rest of the catalogue it is built around a powder-coated steel structure, with the surface material chosen to suit the price point. The typical buyer is i filling a living room bay with a fixed specification.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Open frame ships flat
No carcase means a thin carton and a low CBM per selling unit.
2 to 6 tier formats
One family covers a low sideboard-height unit up to a full-height bookcase.
Industrial and Nordic finishes
Black frame with oak-effect shelves, white frame with white shelves, and other combinations across the range.
What This Model Is Specified Against
Every point below is a decision taken before production on C60040, not a check added afterwards.
- Units that lean away from the wallLadder and tall units are designed with an anchor point and the frame geometry to sit stable.
- Assembly that takes an hourParts are numbered and the hardware pack is sorted by step so the customer is not sorting screws on the floor.
- Shelves bowing under loadShelf thickness and support spacing are set per model so the span carries the load the product is sold for.
Where It Gets Used
Home office
Files, folders and printers on the lower tier.
Living room display
Books, plants and decorative objects.
Storage rooms and garages
Utility shelving at an entry price point.
Retail and café fit-out
Product display and back-bar storage.
Buyers Who Specify It
- Retail buyers running home-office and storage ranges
- Contract buyers fitting out offices and studios
- Importers supplying wholesalers and DIY chains
- E-commerce sellers in the shelving category
Construction
- Powder-coated steel tube or angle frames
- MDF, melamine or particle-board shelves
- 2, 3, 4, 5 and 6 tier configurations
- Anchor point on tall units
- Adjustable feet on selected models
What We Can Confirm
| Model code | C60040 |
|---|---|
| Product name | C60040 |
| Category | Shelf |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. C60040 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on C60040 is fixed per the drawing and held for the life of the order.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
Flat-Pack Carton Design and Why It Drives Your Damage Rate
The carton is not packaging. On a flat-pack furniture programme it is half the product.
Shelving Load Capacity and the Questions Buyers Should Ask
Why a single load figure on a catalogue page tells you almost nothing about a shelf.
Questions About This Model
Can we get a sample of C60040 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Can the shelf heights be adjusted?
Adjustability is model-specific. Fixed-tier and adjustable-tier models both exist in the range.
Can we change the number of tiers?
Yes, on customised models. A tier change usually needs new frame tooling and is quoted with a sample.
What is the load rating per shelf?
Load ratings are confirmed per model at quotation. We do not publish a blanket figure because shelf span and board thickness change between models.
Quote C60040
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.