C60010
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Wanhao builds C60010 as a shelf unit for buyers sourcing a living room range from a single factory. The build combines the factory's metal fabrication with its panel and surface work, so the frame and the top come out of one plant to one standard. It is quoted mainly to c who need one factory to cover a whole product family.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Open frame ships flat
No carcase means a thin carton and a low CBM per selling unit.
2 to 6 tier formats
One family covers a low sideboard-height unit up to a full-height bookcase.
Industrial and Nordic finishes
Black frame with oak-effect shelves, white frame with white shelves, and other combinations across the range.
What This Model Is Specified Against
The problems below are the ones that turn a shelf order into a customer-service case. Each one is a build decision on this model.
- Units that lean away from the wallLadder and tall units are designed with an anchor point and the frame geometry to sit stable.
- Assembly that takes an hourParts are numbered and the hardware pack is sorted by step so the customer is not sorting screws on the floor.
- Shelves bowing under loadShelf thickness and support spacing are set per model so the span carries the load the product is sold for.
Where It Gets Used
Living room display
Books, plants and decorative objects.
Storage rooms and garages
Utility shelving at an entry price point.
Retail and café fit-out
Product display and back-bar storage.
Home office
Files, folders and printers on the lower tier.
Buyers Who Specify It
- E-commerce sellers in the shelving category
- Retail buyers running home-office and storage ranges
- Contract buyers fitting out offices and studios
- Importers supplying wholesalers and DIY chains
Construction
- Powder-coated steel tube or angle frames
- MDF, melamine or particle-board shelves
- 2, 3, 4, 5 and 6 tier configurations
- Anchor point on tall units
- Adjustable feet on selected models
What We Can Confirm
| Model code | C60010 |
|---|---|
| Product name | C60010 |
| Category | Shelf |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. C60010 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. C60010 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Unpack on the carton itself so the finished surfaces never touch the floor.
- Check the parts against the parts list before you start; a missing fixing is easier to report before assembly than during it.
- Assemble on a flat surface and leave every fixing finger-tight until the last one is in place.
- Tighten in sequence, then stand the unit up and adjust the feet against the floor.
- Wipe coated surfaces with a damp cloth only; solvent cleaners will dull a powder-coated finish.
Other Models in This Range
Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Steel Frame Fabrication — Cutting bending welding and coating on one site
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Related guides
Flat-Pack Carton Design and Why It Drives Your Damage Rate
The carton is not packaging. On a flat-pack furniture programme it is half the product.
Shelving Load Capacity and the Questions Buyers Should Ask
Why a single load figure on a catalogue page tells you almost nothing about a shelf.
Questions About This Model
What is the lead time for C60010?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Can we get a sample of C60010 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Do you make a corner version?
Yes, corner units are part of the shelving range. Ask the sales team for the current corner models.
Are wall anchors supplied?
Anchor provision depends on the model and the destination market. Confirm with the sales team before you list.
Can the shelf heights be adjusted?
Adjustability is model-specific. Fixed-tier and adjustable-tier models both exist in the range.
Quote C60010
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.