B60109
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
B60109 is listed under chairs and is quoted per model for container programmes. It is produced through the plant's own press, welding and coating stages, which keeps the frame specification under a single set of drawings. Most enquiries for this model come from e working to a landed-cost target.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Folding and stacking formats
Storage-efficient seating for events, cafés and small homes.
Fabric, PU, panel and plastic seats
Four price tiers on comparable frames.
Matched to the dining range
Chair finishes align with the dining table finishes.
What This Model Is Specified Against
The failure modes in this category are predictable, which means they can be designed out rather than inspected out.
- Joints that loosen with daily useJoint design and hardware are specified for cyclic load, and the fixing method is held for the life of the order.
- Folding mechanisms that pinchFolding geometry and edge finishing are checked on the sample before production starts.
- Seats that separate from the frameSeat fixing type and count are specified per model and inspected before packing.
Where It Gets Used
Events and community halls
Folding chairs stored between uses.
Cafés and canteens
Stacking and wipe-clean seating.
Dining rooms and kitchens
Everyday dining seating.
Home office and study
Desk chairs at an entry price point.
Buyers Who Specify It
- Retail buyers in dining and seating
- Importers supplying seating wholesalers
- E-commerce sellers listing chairs and stools
- Café, canteen and event buyers
Construction
- Powder-coated steel tube frames
- Fabric, PU, plywood, MDF and plastic seats
- Folding, stacking and fixed formats
- Non-marking foot pads
- Pre-assembled or knock-down depending on model
What We Can Confirm
| Model code | B60109 |
|---|---|
| Product name | B60109 |
| Category | Chairs |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a shelf product from a trading company
A trading company sells what a factory already made. B60109 can be modified in colour and size where the model allows it, because the quote comes from the plant that builds it.
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on B60109 is specified against the export route the order actually takes.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Questions About This Model
How is B60109 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
What is the lead time for B60109?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Do you test the chairs to a seating standard?
Test coverage is confirmed per model and per market at quotation. Tell us which standard your market requires before you place the order.
Are the chairs delivered assembled?
Folding chairs ship assembled. Most dining chairs ship knocked down with a hardware pack.
What is the MOQ for chairs?
100 pieces per model on the newer models. Older catalogue models are quoted case by case.
Quote B60109
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.