B60029
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
B60029 is a catalogue model in Wanhao's chairs range, available for OEM and private-label programmes. It is produced to the approved-sample standard, with the frame checked flat and square before the surface components are fitted. The typical buyer is c filling a seating bay with a fixed specification.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Fabric, PU, panel and plastic seats
Four price tiers on comparable frames.
Matched to the dining range
Chair finishes align with the dining table finishes.
Folding and stacking formats
Storage-efficient seating for events, cafés and small homes.
What This Model Is Specified Against
The problems below are the ones that turn a chairs order into a customer-service case. Each one is a build decision on this model.
- Folding mechanisms that pinchFolding geometry and edge finishing are checked on the sample before production starts.
- Seats that separate from the frameSeat fixing type and count are specified per model and inspected before packing.
- Joints that loosen with daily useJoint design and hardware are specified for cyclic load, and the fixing method is held for the life of the order.
Where It Gets Used
Home office and study
Desk chairs at an entry price point.
Events and community halls
Folding chairs stored between uses.
Cafés and canteens
Stacking and wipe-clean seating.
Dining rooms and kitchens
Everyday dining seating.
Buyers Who Specify It
- E-commerce sellers listing chairs and stools
- Café, canteen and event buyers
- Retail buyers in dining and seating
- Importers supplying seating wholesalers
Construction
- Powder-coated steel tube frames
- Fabric, PU, plywood, MDF and plastic seats
- Folding, stacking and fixed formats
- Non-marking foot pads
- Pre-assembled or knock-down depending on model
What We Can Confirm
| Model code | B60029 |
|---|---|
| Product name | B60029 |
| Category | Chairs |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a shelf product from a trading company
A trading company sells what a factory already made. B60029 can be modified in colour and size where the model allows it, because the quote comes from the plant that builds it.
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on B60029 is specified against the export route the order actually takes.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Panel and Glass Components — The surfaces that sit on the frame
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Questions About This Model
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Is B60029 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
How many chairs fit in a 40HQ?
Loading quantity depends on the model and whether it stacks. We confirm the loading plan once the carton drawing is agreed.
Can the seat fabric be changed?
Yes, on models marked Color: Customized. Fabric is booked per order so shipments match.
Do you test the chairs to a seating standard?
Test coverage is confirmed per model and per market at quotation. Tell us which standard your market requires before you place the order.
Quote B60029
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.