A60167
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Wanhao produces A60167 for importers and retail buyers building a living room assortment. The product is built to a fixed drawing so that a second production run reproduces the first, including the hardware pack. It is specified most often by e who need a repeatable model rather than a one-season buy.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Colour and size on request
Frame colour, panel decor and finished size are open for customisation on the models marked Customized.
One factory for frame and panel
Steel fabrication and panel cutting sit in the same plant, so a mixed steel-and-MDF product does not need a second supplier or a second QC standard.
Built for flat pack
Most models ship knocked down with a hardware pack and an instruction sheet, which keeps CBM down and damage claims low.
What This Model Is Specified Against
The problems below are the ones that turn a other models order into a customer-service case. Each one is a build decision on this model.
- Ranges that look inconsistent on the shelfFrame colour, panel decor and hardware finish are matched across a family of models so a coffee table, side table and console table read as one collection.
- Frames that loosen after the customer assembles themTube wall thickness, weld placement and fixing hardware are set per model and held for the life of the order, so the third production run assembles like the first one.
- Finish damage between the coating line and the shelfPowder-coated parts are packed with the contact faces protected; panel and glass parts get corner protection specified on the packing drawing.
Where It Gets Used
Furniture wholesalers
Assorted containers combining tables, racks and storage.
Rental and serviced apartments
Hard-wearing, easy-to-replace occasional furniture.
E-commerce listings
Single-carton products that ship on a parcel network.
Retail home ranges
Seasonal living room promotions for chain and discount retail.
Buyers Who Specify It
- Furniture importers and wholesalers restocking mixed containers
- Retail chain and discounter buyers running seasonal home ranges
- Home-furnishing brands developing a private-label living room line
- E-commerce sellers who need flat-pack cartons that pass drop tests
Construction
- Powder-coated steel tube or sheet frames
- MDF, melamine-faced board or tempered glass tops depending on model
- Knock-down construction with a numbered hardware pack
- Adjustable levelling feet on most floor-standing models
- Modern, industrial and Nordic finish families
What We Can Confirm
| Model code | A60167 |
|---|---|
| Product name | A60167 |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. A60167 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Against a welded one-piece product
A fully welded product is rigid but ships assembled, which multiplies the freight cost per selling unit. A60167 is built to ship flat, with the rigidity engineered into the joint rather than into the volume.
Assembly and Care
- Work with two people for anything larger than a side table; a single-handed assembly is where finishes get marked.
- Identify the front and back panels before assembly — the finished face is not always obvious in flat pack.
- Do not over-tighten fixings into panel material; snug is stronger than forced.
- Position the unit before final tightening if it sits against a wall.
- Clean with a soft damp cloth and dry immediately; do not leave standing water on a panel edge.
Other Models in This Range
Other Models
A60163
View model
Other Models
A60166
View model
Other Models
A60164
View model
Other Models
A60165
View model Buyer programmes
Retail Chains and Discounters — Season-dated programmes, fixed cartons, repeatable quality
Furniture Importers and Wholesalers — One factory, twenty categories, one container
Capabilities
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
Related guides
How to Source Steel Frame Furniture From China Without Getting Burned
The eight questions that separate a factory that will still be producing your model in year three from one that will not.
Powder Coating Explained for Furniture Buyers
What powder coating does, what it does not do, and the three questions to ask before you call a product outdoor-suitable.
Questions About This Model
Can you produce A60167 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
How is A60167 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
Can you match a frame colour to our range?
Yes. Frame colour is customised on request for the models listed as Color: Customized. Send a RAL reference or a physical sample and we confirm it on a pre-production sample.
What is the minimum order quantity?
The published MOQ on the newer models is 100 pieces per model. Older models in the catalogue are quoted case by case.
Do you supply test reports for these products?
Available test reports are confirmed per model and per destination market at quotation. Tell us which standard your market requires and we will confirm in writing what we can supply.
Quote A60167
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.