A60085
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
A60085 is a catalogue model in Wanhao's end table range, available for OEM and private-label programmes. The product is built to a fixed drawing so that a second production run reproduces the first, including the hardware pack. It is specified most often by f who need a repeatable model rather than a one-season buy.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Nesting pairs
Two selling points from one carton footprint.
Finish families that match the coffee tables
So the bay merchandises as a collection.
Small carton, low CBM
The format is chosen to keep the selling unit inside a parcel-friendly box.
What This Model Is Specified Against
The problems below are the ones that turn a end table order into a customer-service case. Each one is a build decision on this model.
- Tops that chip on the edgeEdge banding and corner protection are specified per top material, and the packing drawing is agreed before the first production run.
- Stability under a table lampLeg splay, foot pad and frame gauge are set so the table stays planted when a lamp cable is pulled.
- Cartons that cost more to ship than the table earnsFrames are designed around a flat carton so the product travels as a thin parcel rather than a box of air.
Where It Gets Used
E-commerce accessory listings
Fast-moving single-carton products.
Hotel and rental rooms
Light, replaceable occasional tables.
Bedroom use as a compact bedside
Where a full night stand does not fit.
Living room accessory bays
Lamp tables and sofa-side tables at an entry price point.
Buyers Who Specify It
- Furniture brands extending a living room collection
- Importers topping up a mixed container
- Online sellers listing single-carton accessories
- Discount and variety retail buyers
Construction
- Light-gauge powder-coated steel frames
- MDF, melamine, tempered glass or rattan-effect tops
- Round and square formats, single and nesting
- Flat-pack carton with hardware pack
- Non-marking foot pads
What We Can Confirm
| Model code | A60085 |
|---|---|
| Product name | A60085 |
| Category | End Table |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a shelf product from a trading company
A trading company sells what a factory already made. A60085 can be modified in colour and size where the model allows it, because the quote comes from the plant that builds it.
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on A60085 is specified against the export route the order actually takes.
Assembly and Care
- Work with two people for anything larger than a side table; a single-handed assembly is where finishes get marked.
- Identify the front and back panels before assembly — the finished face is not always obvious in flat pack.
- Do not over-tighten fixings into panel material; snug is stronger than forced.
- Position the unit before final tightening if it sits against a wall.
- Clean with a soft damp cloth and dry immediately; do not leave standing water on a panel edge.
Other Models in This Range
End Table
A60010
View model
End Table
A60009
View model
End Table
A60003
View model
End Table
A60008
View model Buyer programmes
E-Commerce and Flat-Pack Retail — Single-carton products that survive a parcel network
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
Flat-Pack Carton Design and Why It Drives Your Damage Rate
The carton is not packaging. On a flat-pack furniture programme it is half the product.
Questions About This Model
Can you produce A60085 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
How is A60085 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
How many pieces fit in a 40HQ?
Loading quantity depends on the final carton size for the model you choose. We confirm the loading plan in writing once the carton drawing is signed off.
Do nesting tables come as a set or as singles?
Nesting models are quoted as a set. Splitting a set into singles changes the carton and is quoted separately.
Can we get a sample before the order?
Yes. Sample cost and sample lead time are confirmed by the sales team for the specific model.
Quote A60085
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.