Waterproof Bike Pannier 27 L with Quick Release Clip System
27 litres on a clip system that attaches and detaches in seconds
What It Is and Who It Is For
A 27 litre waterproof bicycle pannier weighing 1.0 kilogram, using a quick release clip-on system that needs no straps. It fits most carriers by adjusting the bottom hook position, and a three-point interlock stops the bag swinging sideways on rough surfaces.
Why Buyers Choose This Part
Clips on and off in seconds
A quick release clip system with no straps to thread, which is what makes a pannier practical for a daily commute.
Three-point interlock
Two hooks and a lower interlock, so the bag cannot pivot out and catch a heel.
Adjustable bottom hook
The lower hook position moves, which is how one bag fits most carriers.
27 litres at 1.0 kilogram
Full commuting or touring capacity in a bag that is not heavy before you load it.
Problems It Solves
- Strap-mounted panniers take a minute to fit and a minute to remove, twice a day
- Panniers that swing sideways clip heels and unsettle the bike
- A pannier that only fits one carrier standard is a returns problem
Who It Is For
- Commuters who take the bag off the bike every day
- Bike tourists loading and unloading at every stop
- Brands building a commuting and touring luggage range
Application Scenarios
- Daily commuting with a laptop and a change of clothes
- Bicycle touring and multi-day trips
- Shopping and cargo runs on a city bike
Technical Features
- 27 litre capacity
- 1.0 kg
- Quick release clip-on mounting
- Adjustable bottom hook for carrier compatibility
- Three-point interlock against side swing
Published Specification
| Capacity | 27 L |
|---|---|
| Weight | 1.0 kg |
| Mounting | Quick release clip-on system, no straps required |
| Carrier fit | Compatible with most carriers by adjusting the bottom hook position |
| Stability | Secure 3-point connection with interlock to prevent side swing |
Every figure in this table is transcribed from the VALORIDER catalogue specification for this product. Nothing has been estimated.
Product Views
Compared With the Alternatives
This is the largest bag in the range at 27 litres. The frame and top tube bags carry what you need during a ride; this carries what you need at the other end of it.
Customisation and Manufacturing
Welded bags are built on the high-frequency welding line, where the branding has to be applied without breaking the seal. That usually means a welded or heat transferred mark rather than stitching, because a stitched label would put needle holes back into a bag built to avoid them.
- Welded or heat transferred branding, never stitched through the membrane
- Fabric denier and membrane specified per panel
- Reflective placement set at sampling
- Polybag or colour box packing
Fitting and Living With It
Step 1
Set the bottom hook position once, to suit your carrier, before the first ride.
Step 2
Load heavy items low and close to the wheel so steering stays neutral.
Step 3
Check heel clearance with the bag mounted and loaded, not empty.
Step 4
Lift by the carry handle, not by the mounting hooks.
Others in This Part of the Catalogue
Bicycle Waterproof Tail Bag 840D Nylon with Welded Seams
High-frequency welded 840D nylon that is sealed rather than water resistant
View specification
Waterproof Frame Cross Bag in Two Sizes
600D nylon welded shut in a 125 gram and a 90 gram size
View specification
Waterproof Triangle Frame Bag with Graded Fabrics
600D outside 420D inside 840D on the bottom where it matters
View specification
Bicycle Phone Holder Bag with Rotating Base and Headphone Port
A 360 degree base a sunshade and somewhere to put your passport
View specificationWaterproof Bike Pannier 27 L with Quick Release Clip System Questions
Will it fit my rear carrier?
Is it sold singly or as a pair?
Is it fully waterproof?
Can it be carried off the bike?
Quote Waterproof Bike Pannier 27 L with Quick Release Clip System
Send the quantity, the destination port and any branding requirement. We will come back with the questions that decide the price.