IBC Adapter 2" Camlock Coupler to Hose Tail

Name: IBC Adapter 2" Camlock Coupler to Hose Tail
Brand: United Packaging

Take a Camlock Outlet Down to 1 Inch 1-1/2 Inch or 2 Inch Hose

IBC adapter with 2 inch camlock coupler and hose tail outlet

Product Overview

What This Product Is

A PP adapter with a 2 inch camlock coupler inlet and a hose tail outlet in 1 inch, 1-1/2 inch or 2 inch, sealed with an NBR gasket. It is used where the IBC already carries a camlock outlet and the job is to get a hose onto it quickly.

Key Benefits

Camlock in and hose tail out in a single moulded part keeps the assembly short
Three hose tail sizes cover the usual 1 inch to 2 inch hose bores
The NBR gasket suits a wide liquid range and seals the camlock face
Fitted and released by hand, with no tools and no thread wear

Problems It Solves

What Goes Wrong Without It

A camlock outlet cannot take a hose until something reduces it to the hose bore
Reducing with two separate couplers adds weight that hangs off the valve
Hose sizes vary between jobs, so a fixed connection means changing the whole assembly

Who It Is For

Application Scenarios

Transfer crews working IBCs that are already fitted with camlock outlets
Chemical and AdBlue distributors switching between hose sizes on the same tote
Plant and rental operators standardising hose connections across a yard

Specifications

Technical Data

Material	PP
Inlet	2" camlock
Outlet	1",11/2",2" hose tail
Gasket	NBR

Figures above are taken from the product documentation. Anything not listed is confirmed at enquiry rather than estimated.

Technical Features

Features and Advantages

Features

Fit for IBC containers with camlock outlet
Easy to install and remove
Equipped with NBR seal
Can connect with 1",11/2" and 2" hoses

Advantages

Easy and quick connection and disconnection of IBC tanks, saving time and effort in the transfer of liquids
Can easily connect with 1",11/2" and 2" hoses
Constructed from durable plastics, ensuring long-lasting performance

Use Guide

How to Specify and Use It

Check the IBC or adapter outlet is a 2 inch camlock

Select the hose tail size to match the hose bore

Engage the camlock arms fully and check they are locked down

Clip the hose onto the tail and check both joints before opening the valve

Comparison With Other Products

This part starts from a camlock outlet, whereas the S60x6 hose tail fitting starts from the IBC valve thread itself. Use this one on a tote already converted to camlock, and the S60x6 version where the valve is still bare.

Customisation

Sizes, colours and materials can be adapted where the product allows it, and branding can be applied to closures and cap seals. Confirm the change you need when you send the enquiry.

Quality Control

United Packaging operates a professional quality control system under ISO 9001 certification, following quality management procedures intended to minimise the risk of defects.