- Home
- All Products
- Drum Closures and Accessories
Drum Closures and Accessories
Closures and locking rings for metal and plastic drums, cap seals, and the faucets, pumps and crimping tools that seal a drum on the line and empty it at the point of use.
18 Products in Drum Closures and Accessories
Steel Drum Closures 2" and 3/4"
Bung Closures for Closed Head Steel Drums
View details
Pull Out Spout Closure for Metal Containers
A Pull Out Spout That Fits a Metal Can
View details
Drum Cap Seals 2" and 3/4"
Tinplate and Aluminium Seals for 2 Inch and 3/4 Inch Bungs
View details
Open Head Steel Drum Locking Rings
Bolt Rings and Lever Lock Rings Made to Your Profile
View details
Plastic Drum Cap Seal
A Coloured Seal That Shows the Drum Has Been Opened
View details
Plastic Drum Closure
Bung Plugs for Plastic Barrels in Five Sizes
View details
Plastic Water Butt Tap with Hose Connector
A Weatherproof Tap That Takes a Hose Straight Off the Butt
View details
3/4 Inch Drum Faucets Plastic Taps
Dispense From a Drum Through the Existing Closure
View details
Stainless Steel Drum Spigot
A Stainless Spigot for Water and Wine Barrels
View details
Plastic Water Butt Tap
The Plain PP Tap for Butts Drums and Pails
View details
8mm Quick Serve Tap
A Small Bore Tap for Steady Serving
View details
2 Inch Drum Faucets Plastic Barrels Taps
A Full Bore 2 Inch Tap Straight Into the Drum Bung
View details
Lift Action Drum Pump
Move Fluid Out of a Drum Without Tipping It
View details
Rotary Drum Pump
A Rotary Hand Pump Rated at 20 Litres per Minute
View details
Lever Action Drum Barrel Pump
320 Millilitres of Fluid per Lever Stroke
View details
Plastic Siphon Drum Pump for 15-55 Gallon Drums
A Light Siphon Pump That Reaches the Bottom of the Drum
View details
Steel Pail Lid Closing Tool
Close an 18 to 20 Litre Pail Lid by Hand
View details
Drum Cap Seal Crimping Tools Manual
Crimp 2 Inch and 3/4 Inch Cap Seals by Hand
View detailsWhat Sits Inside Drum Closures and Accessories
Metal Drum Closures
4 products · Closures Locking Rings and Cap Seals for Steel Drums
Plastic Drum Closures
2 products · Bung Plugs and Cap Seals for Plastic Barrels
Drum Faucets and Taps
6 products · From an Eight Millimetre Serve to Full Two Inch Flow
Drum Pumps
4 products · Four Ways to Get Liquid Out of a Drum by Hand
Drum Crimping Tools
2 products · Manual Tools That Make the Seal Repeatable
Why This Category Exists
A drum has two jobs: stay sealed in transit, then give the contents up without a spill. Those are handled by different parts, and mixing suppliers across them is how mismatched threads and wrong gaskets get onto a line.
Who Buys From This Category
- Paint, chemical, oil and lubricant fillers running drum lines
- Drum manufacturers and reconditioners specifying closures and rings
- Distributors and workshops dispensing from drums daily
Core Advantages
- Metal and plastic closures covering both drum body types
- Gasket and O-ring choice across EPDM, BUNA, PE and customised materials
- Faucets from 8mm serve bore up to full 2 inch flow
- Manual crimping and pail closing tools that make the seal repeatable
Drum Closures and Accessories Questions
Do you supply closures for both steel and plastic drums?
Yes. Metal drum closures in 2 inch and 3/4 inch for steel, and plastic closures in five thread sizes for plastic barrels.
Which tap should I use for bulk decanting?
The 2 inch drum faucet, which keeps the full bung bore open.
Can you supply printed cap seals?
Yes, metal cap seals can be printed with your logo and supplied in custom colours.
Do I need a tool to fit cap seals?
Yes, the manual crimping tool for 2 inch and 3/4 inch cap seals.
Specify Drum Closures and Accessories With Us
Send the sizes, thread standards and quantities you need. We will confirm availability, pricing and lead time.