- Home
- All Products
- IBC Parts and Accessories
- IBC Adapters
- S60x6 IBC Fitting with Hose Tail
S60x6 IBC Fitting with Hose Tail
Put a Hose on an IBC Without an Adapter Stack
What This Product Is
A PP fitting with an S60x6 2 inch coarse thread inlet and a hose tail outlet, offered in 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch and 2 inch, with a PE gasket. It screws onto the IBC valve outlet and takes a hose directly, including garden hose and AdBlue dispensing hose.
Key Benefits
- Five hose tail sizes mean the hose on site is matched without a reducer
- One PP part replaces a stack of adapters, so there is a single joint to check
- The PE gasket seals the S60x6 face without tape or sealant
- PP construction avoids over-torquing damage to the plastic valve thread
What Goes Wrong Without It
- Building a hose connection out of two or three generic adapters creates extra leak points
- Hose sizes on site rarely match the IBC valve outlet
- Metal fittings on a plastic IBC valve can strip the thread when overtightened
Application Scenarios
- AdBlue and fuel distributors dispensing from IBCs into vehicles and tanks
- Growers and landscapers running water and liquid feed from bulk containers
- Site and facilities teams that need a quick hose take-off from a tote
Technical Data
| Material | PP |
|---|---|
| Inlet | S60x6(2" Coarse thread) |
| Outlet | 3/4",1",11/2",11/4",2" Hose tail |
| Gasket | PE |
Figures above are taken from the product documentation. Anything not listed is confirmed at enquiry rather than estimated.
Features and Advantages
Features
- Fit for IBC containers that have a S60x6 thread outlet
- Easy to install and remove
- Equipped with PE seal
- Can connect with hoses
Advantages
- Easy and quick connection and disconnection of IBC tanks, saving time and effort in the transfer of liquids
- Can easily connect with hoses
- Constructed from durable plastics, ensuring long-lasting performance
- Fit for most IBC brands
How to Specify and Use It
Confirm the IBC valve outlet is S60x6 with a 2 inch coarse thread
Pick the hose tail size to match the hose bore, from 3/4 inch to 2 inch
Hand tighten onto the valve with the PE gasket seated, then fit the hose and clip it
Flush the fitting after use with AdBlue or chemicals
Comparison With Other Products
This fitting ends in a barbed hose tail for permanently clipped hose. The camlock version of the same S60x6 adapter ends in a camlock coupler for hoses that are connected and disconnected several times a day, and the female thread version is for screwing on taps and rigid fittings instead.
Customisation
Sizes, colours and materials can be adapted where the product allows it, and branding can be applied to closures and cap seals. Confirm the change you need when you send the enquiry.
Quality Control
United Packaging operates a professional quality control system under ISO 9001 certification, following quality management procedures intended to minimise the risk of defects.
Other Items in IBC Adapters
IBC Adapter S60x6 with Camlock Connection
Couple and Uncouple an IBC in One Movement
View details
IBC Fitting S60x6 to Female Thread
Take an IBC Outlet Into BSP Pipework
View details
IBC Adapter S60x6 with Female Thread
Fit a Garden Connector or Tap to an IBC Valve
View details
IBC Adapter M80x3 Female to S60x6 Male
Bring a Chinese Brand IBC Valve Onto the S60x6 Standard
View details
Questions About S60x6 IBC Fitting with Hose Tail
What is the inlet thread?
S60x6, a 2 inch coarse thread.
Which hose tail sizes are available?
3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch and 2 inch.
What is it made from?
PP with a PE gasket.
Will it fit my IBC?
It fits IBC containers with an S60x6 thread outlet, which covers most brands.
Can it be used with AdBlue?
Yes, it is used for connecting AdBlue distribution hoses.
Do I need tools?
No, it installs and removes by hand.
Get a Price on S60x6 IBC Fitting with Hose Tail
Send the quantity, the specification variant and your destination port. We will come back with pricing and lead time.