Sourcing Metal Art for Hotel Interiors

Turning a Mood Board Into a Buildable Art Piece

A mood board shows style, material feel, and scale but not dimensions or fixing. The workshop uses it to propose a form that matches the visual intent, then develops the technical drawing. This step avoids mismatched expectations. Send the mood board early, before the design is finalised, so the piece can be shaped to fit the space and the budget.

Hollow Vs Solid Forms for Hotel Wall Installations

A hollow forged stainless steel hemisphere is lighter than a solid cast copper version of the same size. On plasterboard walls, a heavy cast piece requires a structural pattress behind the wall. The workshop can advise on weight based on material and size, and recommend the fixing type before fabrication begins.

Fixing a Mirror or Hemisphere on Plasterboard

A mirror or hemisphere on a plasterboard wall must be fixed to the studs behind. If the studs are not aligned with the desired position, a plywood pattress must be installed before the wall is closed. This is a fit-out decision, not an installation one. The workshop can provide a fixing detail that matches the wall construction.

Fixing a Large Piece on Concrete or Blockwork

On solid walls, a backing plate is welded to the back of the piece before finishing. The plate is drilled for anchors that go into the wall. The piece can be positioned freely. The workshop builds the plate into the design, so it does not need to be added later, which avoids re-polishing the face.

Matching Finishes Across a Multi Piece Set

When installing a set of wall pieces across a floor, the finish must be consistent. Mirror polish, brushed finish, or colour electroplating are applied in batches to ensure no variation. The workshop can batch the finishes and coordinate the delivery so all pieces arrive with the same surface appearance.