High Power LED Work Light
The SLL-0802-30-M is a 4 inch square high power LED work light designed for machines that operate in low light, dusty, wet or vibrating conditions. Thirty 1W Osram LEDs deliver 2,400 effective lumens in a wide flood beam pattern, illuminating the full work zone around a forklift, excavator or truck cab without creating a narrow hot spot. The die-cast aluminium housing with IP68 sealing and overvoltage and overheat protection ensures reliable operation in harsh environments.
- 30 1W Osram LEDs produce 2,400 effective lumens across a wide flood beam, covering the full work area instead of a single bright spot
- IP68 sealing and a durable cable entry gland prevent water and dust ingress during pressure washing or outdoor use
- Overvoltage and overheat protection extend lamp life in vehicles with unstable electrical systems
- 9 to 32V DC operation allows the same part number to be used on 12V and 24V machines, reducing SKU count
- Die-cast aluminium housing with UV-resistant polyester powder coating resists corrosion and fading in direct sunlight
Where This Lamp Is Used
- Front and side work lighting on forklifts and warehouse loaders operating in dim or unlit storage areas
- Cab roof and side panel lighting on trucks and delivery vans used for night shifts
- Auxiliary lighting on excavators and engineering vehicles working in remote or poorly lit sites
- Loading bay and deck lighting on service trucks and utility vehicles with frequent washdowns
- Nighttime operation lighting on mining support vehicles where vibration and dust degrade standard lamps
Who It Is For
- Distributors of vehicle lighting who need one part number to cover both 12V and 24V fleets
- Machinery OEMs fitting work lights on production lines and requiring consistent mounting patterns
- Fleet operators replacing halogen work lamps that fail after a few hundred hours of use
- 4x4 and industrial accessory brands building a private label work lamp range with consistent performance
Problems It Solves
- Halogen work lamps draw more current and fail quickly under vibration and shock
- Cheap sealed lamps allow water into the housing through the cable entry, leading to fogging and short circuits
- Narrow beam lamps leave the edges of the work area in darkness, increasing accident risk
- Non-protected LED lamps can be damaged by voltage spikes from alternators or jump starts
- Painted metal housings fade and peel under UV exposure, reducing visual clarity and durability
Technical Features
- Thirty 1W Osram LEDs with a raw output of 3,000 lumens and 2,400 effective lumens
- Wide flood beam pattern with no specified lux reading at distance, focused on near-area coverage
- Semi-gloss black polyester powder coating over the full housing and bracket
- Bare wire lead of 40cm as standard with no connector included
- Overvoltage and overheat protection built into the driver circuit
- Operating range of 9 to 32V DC, compatible with 12V and 24V systems
- Rated for -40 to +85 degrees Celsius, suitable for extreme cold and hot environments
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-0802-30-M |
|---|---|
| Max Power | 30W |
| Real Power | 30W |
| LED | 30 pcs x 1W Osram |
| Effective Lumen | 2400 lm |
| Beam Pattern | Flood |
| Colour Temperature | 6000K |
| Operating Voltage | 9 to 32V DC |
| Lens Material | Anti-scratch UV resistant polycarbonate |
| Bracket Material | Die-cast aluminium |
| Waterproof Rating | IP68 |
| Operating Temperature | -40 to +85 degrees Celsius |
| Electrical Connection | Bare wire 40cm |
| Certification | CE, RoHS |
Materials Used
- Anti-scratch UV resistant polycarbonate lens
- Semi-gloss black polyester powder coating
- Silicone rubber gasket and sealed cable entry gland
- Die-cast aluminium mounting bracket
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in semi-gloss black
LED board assembly with Osram emitters
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP68 rating before shipment
- Vibration testing on a vibration test machine to simulate machine-mounted service
- Salt spray corrosion testing on housing coating and bracket
- High and low temperature alternating humidity testing across the -40 to +85 degrees Celsius range
Customisation Options
- Deutsch connector instead of the standard 40cm bare wire lead
- Spot beam optics in place of the flood pattern
- Private label logo on the housing and printed carton
- Alternative cable length for a specific machine harness
- Mixed cartons combining this lamp with other SUNLITEC models for trial orders
How It Compares With the Alternatives
| Round 4 inch work lamp | The square body puts more LED area behind the same mounting footprint but needs a flat surface for the bottom bracket |
|---|---|
| Spot beam version of the same lamp | Flood covers the near working area evenly while spot reaches further ahead but leaves the machine edges dark |
| Larger 6 inch work lamp | Lower output but fits guard rails and cab pillars where a 6 inch body will not clear |
How to Fit and Use It
- Leave a drip loop in the 40cm lead so water runs away from the gland rather than into it
- Aim the flood beam at the working area close to the machine and use a spot lamp separately for distance
- Clean the PC lens with water and a soft cloth only, since solvents will haze the anti-scratch coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 9 to 32V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is CE and RoHS compliant, but no road approval such as ECE R10 is listed for this model.
Get a Price on High Power LED Work Light
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.