30W LED BEZEL LESS WORK LIGHT
The absence of a bezel reduces the risk of impact damage and allows a cleaner, more compact profile on tight mounting spaces. Thirty watts of LED power deliver 2200 lumens of consistent output across a wide beam, ensuring visibility on construction sites, mining equipment and off-road vehicles where lighting must survive vibration, dust and temperature extremes. The die-cast aluminium housing is rated IP67 and operates reliably from -45 to +85 degrees Celsius, making it suitable for Arctic cold and desert heat. The 10-32V DC input range supports both 12V and 24V systems, reducing the need for multiple SKUs in fleet maintenance.
- Bezel less design eliminates a weak point in impact zones and reduces overall profile for tight mounting spaces
- 30W LED power delivers 2200 lumens with a wide beam pattern for even illumination across the work area
- IP67 sealing prevents water and dust ingress during prolonged exposure to rain, mud and pressure washing
- Operates from -45 to +85 degrees Celsius, suitable for extreme cold and high heat environments
- 10-32V DC input range allows one part number to serve both 12V and 24V vehicle systems
Where This Lamp Is Used
- Front and side work lighting on excavators and loaders operating in wet and dusty conditions
- Auxiliary lighting on mining machinery where vibration and dust degrade sealed beam lamps
- Cab and roof lighting on off-road vehicles used in Arctic or desert environments
- Work area illumination on utility trucks and service vehicles that operate in all weather
- Lighting on engineering vehicles where space is limited and impact resistance is critical
Who It Is For
- Machinery OEMs integrating work lights into production line builds with consistent mounting and electrical specs
- Distributors of vehicle lighting needing a single part number for both 12V and 24V fleets
- Fleet operators replacing halogen lights that fail under vibration and heat
- 4x4 accessory brands building a private label work light line with a compact, rugged design
- Equipment dealers fitting lights on machines where space is limited and durability is essential
Problems It Solves
- Bezels on traditional work lights crack under impact and allow water to enter through the gap
- Halogen lights fail early under vibration and draw excessive current from the vehicle’s electrical system
- Lights with poor sealing fog up or fail after a few wash cycles due to water ingress
- Narrow beam lights leave the edges of the work area dark, increasing the risk of accidents
- Lights that do not operate at extreme temperatures fail during cold starts or in high heat environments
Technical Features
- 30W LED power with a real luminous flux of 2200 lumens and a wide beam pattern
- IP67 waterproof rating with sealed cable entry and gasketed housing joints
- Die-cast aluminium alloy housing with a semi-gloss black powder coating
- 10-32V DC input range compatible with 12V and 24V vehicle systems
- Operating temperature range from -45 to +85 degrees Celsius
- Bezel less design with a flush-mounted LED array for impact resistance
- EMC protected internal wiring to prevent electrical interference
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-9003 |
|---|---|
| Max Power | 30W |
| Luminous Flux | 2200 LM |
| LED | 30W total |
| Beam Pattern | Wide |
| Waterproof Rating | IP67 |
| Operating Voltage | 10-32V DC |
| Operating Temperature | -45 to +85 degrees Celsius |
| Housing Material | Aluminium alloy, semi-gloss black powder coating |
Materials Used
- Die-cast aluminium alloy housing and heat sink
- Semi-gloss black powder coated surface
- Silicone rubber gasket and sealed cable entry
- Bare copper wire lead with PVC insulation
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in semi-gloss black
LED board assembly with high-power LEDs
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP67 rating before shipment
- Vibration testing on a vibration test machine to simulate machine mounted service
- Salt spray corrosion testing on housing coating and mounting bracket
- High and low temperature alternating humidity testing across the -45 to +85 degrees Celsius window
Customisation Options
- Alternative cable length for a specific machine harness
- Private label logo on the housing and printed carton
- Mixed cartons combining this lamp with other SUNLITEC models for trial orders
- Spot beam optics in place of the standard wide beam
How It Compares With the Alternatives
| Traditional work light with bezel | Bezel less design reduces impact damage risk and allows tighter mounting in confined spaces |
|---|---|
| Halogen work lamp of similar output | Draws less current, survives vibration, and lasts 10 times longer than halogen |
| Round 4 inch work lamp | The square body fits flush on flat surfaces and has a lower profile than round designs |
| Larger 6 inch work lamp | Lower output but fits in tight spaces where a larger body would interfere with guards or controls |
How to Fit and Use It
- Wire through a fused feed sized for 30W at 12V or 24V and keep the cable entry pointing downward to prevent water entry
- Aim the wide beam at the immediate work area and use a spot lamp separately for long-distance visibility
- Clean the housing with water and a soft cloth only—avoid solvents that may degrade the powder coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 10 to 32V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is IP67 rated and operates in extreme temperatures, but no specific road approval is listed in the product facts.
Get a Price on 30W LED BEZEL LESS WORK LIGHT
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.