24W LED BEZEL LESS WROK LIGHT
The SLL-1024B is a 24W bezel-less LED work light designed for machines that operate in extreme conditions with no tolerance for failure. It delivers 15000 lumens from a single LED array, providing broad, even illumination across the work zone without a visible bezel to obstruct the beam. The die-cast aluminium housing resists deformation under impact and maintains performance across a -45 to +85 degrees Celsius range, making it suitable for heavy machinery in Arctic winters and desert heat. The IP67 rating ensures it survives dust storms and high-pressure washes, while the 10-32V operating window supports both 12V and 24V systems without voltage regulation.
- 15000 lumens of uniform light output across the work area without a bezel to block the beam
- IP67 sealing prevents dust ingress and water immersion up to 1 meter for 30 minutes
- 10-32V DC input allows the same part number to be used on 12V and 24V machines
- Die-cast aluminium housing resists impact and thermal stress in harsh environments
- 50000 hour lifespan reduces replacement frequency on machines with long operating cycles
Where This Lamp Is Used
- Front and side work lighting on excavators and loaders operating in dusty construction zones
- Cab and boom lighting on mining machinery exposed to sand, mud and high vibration
- Auxiliary lighting on forklifts and material handling equipment in cold storage warehouses
- Night shift lighting on agricultural harvesters and grain transport vehicles
- Emergency lighting on service and utility vehicles used in remote or off-grid locations
Who It Is For
- Machinery OEMs integrating lighting into production lines with consistent mounting and electrical specs
- Fleet operators replacing halogen lights that fail under vibration and high temperature
- Distributors sourcing a single model that works on both 12V and 24V vehicle platforms
- 4x4 accessory brands building a private label work light range with minimal SKU variation
- Equipment dealers fitting lighting on machines sold in extreme climates
Problems It Solves
- Bezels on traditional LED lights create shadow zones and reduce effective beam width
- Halogen work lights draw excessive current and fail within weeks under vibration
- Lights with lower voltage tolerance require separate part numbers for 12V and 24V fleets
- Narrow beam lights leave the near edge of the work zone in darkness, increasing accident risk
Technical Features
- Single 24W LED array with a real luminous flux of 15000 lumens
- Bezel-less design with no metal frame around the LED to block or reflect light
- Die-cast aluminium housing with a semi-gloss black powder coating for corrosion resistance
- IP67 rating confirmed via water immersion and dust exposure testing
- Operating voltage range of 10 to 32V DC, compatible with 12V and 24V systems
- Operating temperature range of -45 to +85 degrees Celsius
- No visible bezel or housing frame to obstruct the beam pattern
- Mounting bracket integrated into the housing base for direct bolt-on installation
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-1024B |
|---|---|
| LED Power | 24W |
| Operating Voltage | 10-32V DC |
| Waterproof Rating | IP67 |
| Housing Material | Aluminium alloy |
| Operating Temperature | -45 to +85 degrees Celsius |
| Beam Pattern | Wide flood |
| Mounting Type | Bottom mount, integrated bracket |
| Connector | Bare wire, Deutsch connector available on request |
Materials Used
- Die-cast aluminium alloy housing and integrated mounting bracket
- Semi-gloss black powder coating for surface protection
- Anti-reflective, UV-stable polycarbonate lens (implied by bezel-less design)
- Silicone rubber gasket for sealing at the cable entry point
- Bare copper wire lead with PVC insulation
How This Lamp Is Built
Die casting of the aluminium housing and integrated bracket
Powder coating application and curing in semi-gloss black
LED board assembly with single 24W emitter
Lens bonding and gasket sealing at the housing interface
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing tested to IP67 standard via dust chamber and water immersion
- Vibration testing on a vibration test machine to simulate machine-mounted service
- Salt spray corrosion testing on housing coating and bracket
- High and low temperature alternating humidity testing across the -45 to +85 degrees Celsius range
Customisation Options
- Alternative cable length to match a specific machine harness
- Private label logo on the housing and printed carton
- Mixed cartons combining this lamp with other SUNLITEC models for trial orders
- Spot beam optics in place of the standard wide flood pattern
How It Compares With the Alternatives
| Traditional LED work light with bezel | The bezel-less design removes shadow zones and increases effective beam width by 15% |
|---|---|
| Larger 30W LED work light | Lower power but fits tight spaces where a larger body would interfere with guards or controls |
| Round 24W LED work light | Square body provides a larger mounting surface and better heat dissipation for the same footprint |
How to Fit and Use It
- Aim the wide flood beam at the immediate work zone and use a spot lamp separately for distant visibility
- Clean the lens with water and a soft cloth only, since solvents will degrade the anti-reflective coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 10 to 32V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for use on machines that operate in extreme climates
The lamp is rated for -45 to +85 degrees Celsius and carries IP67 sealing, making it suitable for Arctic and desert environments.
Get a Price on 24W LED BEZEL LESS WROK LIGHT
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.