20W 2600lm LED LED BEZEL LESS WORK LIGHT
The SLL-9002Y is a 20W bezel-less LED work light designed for machines that operate in extreme conditions and require consistent illumination without the risk of lens damage. The light delivers 2600 effective lumens from a single 20W LED, providing broad, even coverage across the work zone. The die-cast aluminium housing is sealed to IP67 and rated for -45 to +85 degrees Celsius, making it suitable for use on forklifts, excavators, and off-road vehicles that face dust, water, and temperature extremes. The bezel-less design eliminates a fragile glass cover, reducing the risk of impact failure during operation.
- 2600 effective lumens from a single 20W LED provide broad, even illumination across the work area
- IP67 sealing prevents water and dust ingress during high-pressure washing and outdoor exposure
- Bezel-less design removes a vulnerable glass lens, reducing failure risk from impact or vibration
- Operates across 10 to 32V DC, compatible with both 12V and 24V vehicle electrical systems
- Rated for more than 50000 hours, reducing replacement frequency on machines with long operating cycles
Where This Lamp Is Used
- Front and side work lighting on forklifts and loaders operating in warehouses with high humidity and frequent washdowns
- Auxiliary lighting on excavators and engineering vehicles in dusty or wet construction sites
- Cab and deck lighting on service trucks and utility vehicles used in remote or extreme climates
- Nighttime operation lighting on mining support vehicles exposed to vibration and temperature swings
- Fleet maintenance lighting on tipper trucks and hook lift bodies where impact resistance is critical
Who It Is For
- Distributors of industrial vehicle lighting needing one part number to serve both 12V and 24V fleets
- Machinery OEMs integrating work lights into production line builds with consistent mounting and electrical specs
- Fleet operators replacing halogen lamps that fail under vibration and draw excessive current
- 4x4 and industrial accessory brands developing a private label work light range with high durability
Problems It Solves
- Halogen work lights fail quickly under vibration and draw significantly more current than LED alternatives
- Glass-bezelled LED lights crack or fog when struck by debris or exposed to thermal shock
- Standard sealed lights allow water ingress through the cable entry when pressure washing is used
- Narrow beam lights leave the edges of the work zone dark, increasing the risk of accidents
- Lights with limited temperature ranges fail in extreme cold or heat, especially on machines used in mining or arctic regions
Technical Features
- Single 20W LED with a luminous flux of 2600 lumens and a real power draw of 20W
- Bezel-less design with a direct LED array exposed to the environment but protected by a durable lens
- Die-cast aluminium housing with a semi-gloss black powder coating for corrosion resistance
- IP67 sealing with a sealed cable entry gland to prevent dust and water ingress
- 10 to 32V DC input range supports both 12V and 24V vehicle systems without voltage regulation
- Operating temperature range from -45 to +85 degrees Celsius for use in extreme environments
- Anti-scratch polycarbonate lens over the LED array to resist abrasion from debris and cleaning
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-9002Y |
|---|---|
| Max Power | 20W |
| Real Power | 20W |
| LED | 1 x 20W |
| Theoretical Lumen | 2600 lm |
| Effective Lumen | 2600 lm |
| Beam Pattern | Flood |
| 1 Lux Reading | Not specified |
| Colour Temperature | Not specified |
| Operating Voltage | 10-32V DC |
| Amp Draw | Not specified |
| Housing Material | Aluminium alloy, semi-gloss black powder coating |
| Lens Material | Anti-scratch PC |
| Bracket Material | Not specified |
| Waterproof Rating | IP67 |
| Operating Temperature | -45 to +85 degrees Celsius |
| Size | Not specified |
| Net Weight | Not specified |
| Packing | Not specified |
| Certification | Not specified |
Materials Used
- Die-cast aluminium alloy housing and heat sink
- Anti-scratch UV resistant polycarbonate lens
- Semi-gloss black powder coating on the housing
- Silicone rubber gasket and sealed cable entry gland
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in semi-gloss black
LED board assembly with single 20W emitter
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP67 rating before shipment
- Vibration testing on a vibration test machine to reproduce machine mounted service
- Salt spray corrosion testing on housing coating
- High and low temperature alternating humidity testing across the -45 to +85 degrees Celsius window
Customisation Options
- Alternative cable length to match a specific machine harness
- Private label logo on the housing and printed carton
- Mixed cartons combining this lamp with other SUNLITEC models for trial orders
- Spot beam optics in place of the standard flood pattern
How It Compares With the Alternatives
| Glass-bezelled LED work light | Bezel-less design eliminates a fragile lens, reducing failure risk from impact or thermal shock |
|---|---|
| Halogen work lamp of similar output | Draws 20W against roughly 60W for halogen and survives vibration that destroys filament-based lamps |
| Round 4 inch work lamp | The flat bezel-less design fits flush on surfaces where a rounded bezel would interfere with mounting |
| Larger 6 inch work lamp | Lower output but fits in tight spaces where a larger body would not clear guards or brackets |
How to Fit and Use It
- Wire through a fused feed sized for the expected current draw and keep the cable entry pointing downward
- Aim the flood beam at the immediate work zone and use a spot lamp separately for long-distance visibility
- Clean the PC lens with water and a soft cloth only, as solvents may damage the anti-scratch coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 10 to 32V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is IP67 rated and operates across a wide voltage and temperature range, but specific road approval is not listed in the provided facts.
Get a Price on 20W 2600lm LED LED BEZEL LESS WORK LIGHT
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.