Medical Equipment and Accessories Manufacturer in Shenzhen Since 2003 Tel 0086-755-23247025 [email protected]
Home›Products›ECG Cables With Separate Leadwires›NIHON KOHDEN EKG cable with 10 leads
Model RSDK003

NIHON KOHDEN EKG cable with 10 leads

The NIHON KOHDEN EKG cable with 10 leads is a two-piece ECG cable set supplied under Ronseda part number RSDK003. The assembly uses a 15Pin termination. The published compatibility list covers 14 models, among them 1. Nihon Kohden(Original no:901D)ECG-9620 and ECG-9010.

ECG Cables With Separate Leadwires

ModelRSDK003
Product typeECG/EKG cable with leads
Connector15Pin
Compatible monitors1. Nihon Kohden(Original no:901D)ECG-9620, ECG-9010, ECG-9020, ECG-9022, ECG-9110, ECG-9130, ECG-9132, Biocare, DongJiang ECG-11A, ECG-11B, ECG-11D, ECG-32A and others
Warranty12 months after shipment
Price basisFOB Shenzhen; CFR or CIF quoted on request
Country of manufactureChina
Overview

Product Overview

As listed by the manufacturer

  • Nihon Kohden 10 leads EKG cable
  • AHA or IEC
  • DB15M >Banana 4.0(Original no:901D) or Din 3.0 or snap or clip
  • without resistance or with 4.7K resistance inside
  • Specifications:
  • Trunk cable connector: D-SUB 15Pin Male plug
  • Trunk cable material: 26AWG/10C+Shield
  • Yoke: one-piece(S)
  • Patient leadwires material: 26AWG/1C+shield
  • Patient end termination: Din 3.0 or Banana 4.0 or snap or clip
  • Advantages
  • shield,pliability,durable
Value

What It Solves and Why It Is Worth Buying

Problems it solves

  • Leadwires fail one at a time, usually where the wire meets the clip. When a set is moulded in one piece a single broken lead condemns the whole assembly.
  • Buying the instrument and its consumables separately usually means two lead times and two sets of paperwork.
  • Payment is 100% T/T in advance or Western Union preferred, and shipment goes by DHL, UPS or FedEx.

Key benefits

  • A two-piece set lets the ward replace the failed leadwire alone, which turns the cost of a break from a full set into a single wire.
  • The 15Pin termination is fixed, so the part either fits the monitor socket or it does not — there is no adapter guesswork at the bedside.
  • A published compatibility list of 14 monitor models lets the buyer confirm fit before the order rather than after delivery.
  • Warranty runs 12 months after shipment, and returns are accepted for quality reasons inside that period.
  • The same factory supplies more than 100 countries, so export documentation and packing are routine rather than a one-off.
Specification

Technical Features

  • Nihon Kohden(Original no:901D)ECG-9620, ECG-9010, ECG-9020, ECG-9022, ECG-9110, ECG-9130, ECG-9132,Biocare,DongJiang ECG-11A,ECG-11B, ECG-11D, ECG-32A, (II), ECG-120
  • Cardiofax6151/6353/8270/8350/8370/8420/8423/8450/8453/8820/8823/8830/9130/Q
Compatibility

Compatible Monitor Models

  • 1. Nihon Kohden(Original no:901D)ECG-9620
  • ECG-9010
  • ECG-9020
  • ECG-9022
  • ECG-9110
  • ECG-9130
  • ECG-9132
  • Biocare
  • DongJiang ECG-11A
  • ECG-11B
  • ECG-11D
  • ECG-32A
  • (II)
  • ECG-120

Listed by Ronseda for this part number. If your monitor is not on the list, send the model and a photograph of the socket and we will confirm before you order.

Application

Who It Is For and Where It Is Used

Who it is for

  • Wards and theatres running continuous ECG, and biomedical teams that would rather replace one damaged leadwire than a whole cable set.
  • Distributors and dealers who consolidate a mixed accessory list into one shipment from one factory.

Application settings

  • Continuous monitoring on general wards
  • Operating theatre and anaesthesia
  • Stress and rest ECG recording
  • Emergency departments and transfer
Use guide

Use and Handling Guide

  1. Check that the monitor socket matches the 15Pin termination before connecting; do not force a partly seated plug.
  2. Inspect the cable along its whole length for cuts, kinks and exposed conductor before each use.
  3. Route the cable clear of bed rails and trolley wheels; most failures start as a crush at the strain relief.
  4. Clean with the agent named in the monitor manual; do not immerse the connector or autoclave the assembly.
  5. Replace the part when the trace becomes intermittent as the cable is flexed near the connector.
Buying terms

Quality Control Customisation and Terms

Quality control

Production runs under the factory quality control system and every shipment is inspected before it leaves Shenzhen.

Customisation

OEM and ODM services are available according to customer requirements. On accessory lines that includes specified connectors, cable lengths and customer labelling.

Certification

Certificate numbers and scopes are supplied on request with the quotation. We do not publish certification claims we cannot evidence.

Comparison

How It Compares With The Rest Of The Range

Burdick EKG cable with 10 leadsSame family, 15PIN termination.
Marqutte EKG cable with 10 leadsSame family, 15PIN termination.
Simens EKG cable with 10 leadsSame family, model RSDK155.
FAQ

Questions About NIHON KOHDEN EKG cable with 10 leads

Which monitors does the NIHON KOHDEN EKG cable with 10 leads fit?
Ronseda lists it against 1. Nihon Kohden(Original no:901D)ECG-9620, ECG-9010, ECG-9020, ECG-9022, ECG-9110, ECG-9130, ECG-9132, Biocare and 6 further models. If your monitor is not on that list, send the model name and a photograph of the socket and we will confirm before you order.
Can the connector be changed?
This part is supplied with a 15Pin termination. Other terminations in the same range are available as separate part numbers, and OEM versions can be built to a specified connector on request.
What warranty applies?
12 months after shipment. Returns are accepted for quality reasons within the warranty period, excluding misuse, negligence or accident. Contact sales for confirmation before returning anything.
What are the payment and delivery terms?
FOB Shenzhen; CFR or CIF quoted on request. 100% T/T in advance or Western Union preferred; irrevocable L/C at sight accepted. Shipment is arranged within one week of cleared payment when the item is in stock, by DHL, UPS, FedEx or a courier you nominate.
Can I order a sample first?
Yes. Samples are available once sample charges are received, and for accessories the sample charge is refunded when the order is confirmed.
Do you supply this under our own brand?
Yes. OEM and ODM versions are available, including customer labelling and packaging. Send your artwork and quantity and we will quote against it.

Request a quotation for NIHON KOHDEN EKG cable with 10 leads

Quote reference RSDK003. Send the quantity and destination port and we reply with the price basis, packing detail and lead time.