Model RSDK075
Burdick EKG cable with 10 leads RSDK075
Burdick EKG cable with 10 leads (RSDK075) is part of the Ronseda ecg cables with separate leadwires range. Supplied with a 15PIN termination. It is listed as compatible with Burdick EK10.
ECG Cables With Separate Leadwires
| Model | RSDK075 |
|---|---|
| Product type | ECG/EKG cable with leads |
| Connector | 15PIN |
| Compatible monitors | Burdick EK10 |
| Warranty | 12 months after shipment |
| Price basis | FOB Shenzhen; CFR or CIF quoted on request |
| Country of manufacture | China |
Overview
Product Overview
As listed by the manufacturer
- Original no: EK-10
- AHA or IEC
- DB15M>Banana 4.0,Din 3.0,Snap,Clip
- Trunk cable connector: D-SUB 15PIN MALE plug
- Trunk cable material: 26AWG/10C+Shield
- Yoke: one-piece(s)
- Patient leadwire material: 26AWG/1C+shield
- Length:3.6m
- Advantages
- shield, pliability, durable
Value
What It Solves and Why It Is Worth Buying
Problems it solves
- Leadwires fail one at a time, usually where the wire meets the clip. When a set is moulded in one piece a single broken lead condemns the whole assembly.
- A single supplier for the unit and its accessories keeps commissioning, spares and service on one purchase order.
- Payment is 100% T/T in advance or Western Union preferred, and shipment goes by DHL, UPS or FedEx.
Key benefits
- A two-piece set lets the ward replace the failed leadwire alone, which turns the cost of a break from a full set into a single wire.
- The 15PIN termination is fixed, so the part either fits the monitor socket or it does not — there is no adapter guesswork at the bedside.
- A published compatibility list of 1 monitor models lets the buyer confirm fit before the order rather than after delivery.
- Warranty runs 12 months after shipment, and returns are accepted for quality reasons inside that period.
- Ronseda has built this class of product in Shenzhen since 2003 and ships to more than 100 countries.
Compatibility
Compatible Monitor Models
- Burdick EK10
Listed by Ronseda for this part number. If your monitor is not on the list, send the model and a photograph of the socket and we will confirm before you order.
Application
Who It Is For and Where It Is Used
Who it is for
- Wards and theatres running continuous ECG, and biomedical teams that would rather replace one damaged leadwire than a whole cable set.
- Distributors and dealers who consolidate a mixed accessory list into one shipment from one factory.
Application settings
- Continuous monitoring on general wards
- Operating theatre and anaesthesia
- Stress and rest ECG recording
- Emergency departments and transfer
Use guide
Use and Handling Guide
- Check that the monitor socket matches the 15PIN termination before connecting; do not force a partly seated plug.
- Inspect the cable along its whole length for cuts, kinks and exposed conductor before each use.
- Route the cable clear of bed rails and trolley wheels; most failures start as a crush at the strain relief.
- Clean with the agent named in the monitor manual; do not immerse the connector or autoclave the assembly.
- Replace the part when the trace becomes intermittent as the cable is flexed near the connector.
Buying terms
Quality Control Customisation and Terms
Quality control
Production runs under the factory quality control system and every shipment is inspected before it leaves Shenzhen.
Customisation
OEM and ODM services are available according to customer requirements. On accessory lines that includes specified connectors, cable lengths and customer labelling.
Certification
Certificate numbers and scopes are supplied on request with the quotation. We do not publish certification claims we cannot evidence.
Comparison
How It Compares With The Rest Of The Range
| Marqutte EKG cable with 10 leads | Same family, model RSDK057. |
|---|---|
| Simens EKG cable with 10 leads | Same family, model RSDK155. |
| Schiller EKG cable with 10 leads | Same family, 15pin termination. |
Read next
Guides and Programmes For This Product
FAQ
Questions About Burdick EKG cable with 10 leads RSDK075
Which monitors does the Burdick EKG cable with 10 leads fit?
Ronseda lists it against Burdick EK10. If your monitor is not on that list, send the model name and a photograph of the socket and we will confirm before you order.
Can the connector be changed?
This part is supplied with a 15PIN termination. Other terminations in the same range are available as separate part numbers, and OEM versions can be built to a specified connector on request.
What warranty applies?
12 months after shipment. Returns are accepted for quality reasons within the warranty period, excluding misuse, negligence or accident. Contact sales for confirmation before returning anything.
What are the payment and delivery terms?
FOB Shenzhen; CFR or CIF quoted on request. 100% T/T in advance or Western Union preferred; irrevocable L/C at sight accepted. Shipment is arranged within one week of cleared payment when the item is in stock, by DHL, UPS, FedEx or a courier you nominate.
Can I order a sample first?
Yes. Samples are available once sample charges are received, and for accessories the sample charge is refunded when the order is confirmed.
Do you supply this under our own brand?
Yes. OEM and ODM versions are available, including customer labelling and packaging. Send your artwork and quantity and we will quote against it.
Request a quotation for Burdick EKG cable with 10 leads RSDK075
Quote reference RSDK075. Send the quantity and destination port and we reply with the price basis, packing detail and lead time.