A-1-35ML
A-1-35ML is a 35 ml aluminium perfume atomizer with a cylindrical body and a metal cap, designed for fragrance brands launching new scents or testing market response.
About A-1-35ML
A-1-35ML is a 35 ml aluminium perfume atomizer with a cylindrical body and a metal cap, designed for fragrance brands launching new scents or testing market response. The shell is cold extruded and anodized in-house, then assembled with a pump and collar before packing. Twelve pieces are packed in an inner box and 144 pieces in one export carton, enabling accurate cost modeling for small batches. The MOQ is quoted per colour, and samples are available for pre-production approval.
Specification
| Type Code | A-1-35ML |
|---|---|
| Pieces Per Inner Box | 12PCS |
| Pieces Per Export Carton | 144PCS |
Key Benefits
- Anodized aluminium shell provides durable, chip-resistant colour that matches brand references
- Cylindrical body offers consistent print area for pad printing or hot stamping
- 12 pieces per inner box and 144 pieces per export carton allow for small batch sampling and freight planning
- Samples can be approved before tooling, reducing risk in new product development
- Same pump and collar interface as other A series atomizers enables shared tooling across sizes
Where A-1-35ML Belongs
Who It Is For
- Fragrance brands testing a new scent with a small market group
- Private-label fillers evaluating packaging appearance and function before bulk order
- Contract packers verifying assembly and filling compatibility
- Promotional gift buyers needing a metal-feel item for a limited run
- Packaging buyers who require physical samples before approving tooling
Problems It Solves
- Buyers cannot confirm colour or finish until they see a physical sample, leading to delays
- Tooling costs are high when a colour or finish is approved too late in the process
- Incorrect pump fit or cap alignment discovered only after full production
- Lack of sample availability leads to misaligned expectations between buyer and factory
- Inconsistent packaging across test batches makes market feedback unreliable
Application Scenarios
- Sampling programme for a new fragrance launch with a limited number of units
- Pre-production approval for a new scent line before committing to a full MOQ
- Travel-size version of a flagship fragrance tested in retail or duty-free markets
- Private-label filler testing packaging fit and brand perception with a small batch
- Contract packer validating packaging compatibility with a client's filling line
Technical Features
- Aluminium outer shell produced by cold extrusion, then anodized for colour
- Cylindrical body with constant diameter for consistent print placement
- Pump and collar assembled and function-checked before packing
- Inner box contains 12 pieces; export carton contains 144 pieces
- Colour is quoted and tooled per colour, which is why MOQ is stated per colour
Materials Process and Checks
Materials
- Aluminium shell, cold extruded and anodized in-house
- Plastic pump and inner components produced on injection molding lines
Quality Control
- Shell colour is checked against the approved anodizing sample before assembly
- Pump and collar fit is function-checked on assembly
- Inner-box and carton counts are verified at packing so shipped quantity matches the order
Customization Options
- Anodized colour to a submitted reference, quoted per colour
- Pad printing or hot stamping of a brand mark on the cylinder wall
- Alternative pump and collar finishes from the same A series tooling
- Custom inner-box and carton marking for distributor warehouses
Compared With The Alternatives
| Painted aluminium atomizer | Anodizing embeds colour in the metal surface, so edges and bands resist chipping better than sprayed paint during sampling and transit |
|---|
Use Guide
- Request a physical sample before approving tooling to verify colour, finish, and fit
- Confirm the anodized colour against a physical reference before production begins
- Use the 12-piece inner box for small-scale testing and feedback collection
- Order in multiples of 144 pieces to keep export cartons full and simplify freight planning
A-1-35ML Buyer Questions
Can I get a sample before approving tooling?
Yes. Samples are available for pre-production approval. Confirm the anodized colour and finish with a physical reference before tooling starts.
How many pieces are in one export carton?
144 pieces per export carton, packed as inner boxes of 12 pieces. This allows for small batch testing and freight modeling.
Is the MOQ per colour?
Yes. The MOQ is quoted per colour because anodizing is set up for one colour at a time. Samples are available to confirm colour before tooling.
Can I see the actual colour before production?
Yes. Send a physical colour reference and we will produce an anodized sample for approval before the production run.
Can the atomizer be printed with our logo?
Yes. The cylinder wall is a constant diameter, which suits pad printing and hot stamping. Confirm the design with a sample.
Do you supply filled atomizers for sampling?
No. We supply empty packaging. Filling is done by your filler or contract packer. Samples are provided empty for testing.
Ask About A-1-35ML
Send the quantity, the destination country and a colour reference and we come back with a price and the packing figures.