Overseas Warehouse

Lovsun 12V 100Ah LiFePO4 Battery

Name: Lovsun 12V 100Ah LiFePO4 Battery
Brand: Lovsun
SKU: lovsun-12v-100ah-lifepo4-battery

100 Ah / 12 V

Lovsun 12V 100Ah LiFePO4 Battery is a 12 V LiFePO4 block rated at 100 Ah / 12 V, a drop-in replacement for lead-acid in off-grid cabins, marine, RV and small telecom loads.

Request A Quote Request The Datasheet

Key Benefits

What This Product Changes On Your Project

LiFePO4 chemistry - a flatter thermal profile and a longer cycle life than NMC at the same usable energy
Integrated BMS with cell balancing, over-current, over-temperature and short-circuit protection
Parallel expansion, so a system can be sized for today's load and extended later without replacing the first units
Standard CAN and RS485 communication for inverter handshake, rather than a closed protocol that locks the buyer to one brand
Usable depth of discharge that does not have to be derated the way lead-acid does

Application Scenarios

Off-grid cabins, farms and workshops running entirely on PV and storage
Small commercial premises cutting evening peak import
Marine, RV and mobile installations replacing lead-acid banks
Residential solar self-consumption, storing midday PV for the evening load
Backup supply for homes and small offices on an unstable grid

Who It Is For

Off-grid property owners sizing a standalone power system
Solar installers specifying residential and light commercial storage
Distributors and wholesalers stocking storage batteries for an installer base
System integrators building backup and off-grid packages

Problems It Solves

Lead-acid banks that have to be oversized because only part of the capacity is usable
Replacement cycles every few years and the disposal cost that comes with them
Solar output exported at a low feed-in tariff and bought back at a high retail one
Outages that take critical loads down with no transfer time budget

Technical Features

CAN and RS485 interfaces for inverter handshake and state-of-charge reporting
Parallel connection of multiple units to build capacity in steps
Enclosure and terminal layout designed for a single-installer fit
State-of-charge indication at the unit, not only through the inverter app
LiFePO4 cells with an integrated BMS handling balancing and protection

Specifications

Published Specification Data

These figures come from the manufacturer datasheet for this model. Where a value you need is not listed, ask for the full datasheet rather than assuming a typical figure.

System voltage	12 V
Cell capacity	100 Ah
Battery chemistry	LiFePO4
Brand	Lovsun

Quality Control

Full-function test on every finished unit, not a sample from the batch
Insulation and dielectric withstand testing on completed assemblies
Aged and burn-in run before packing, so early-life failures happen in the factory
Serialised traceability from cell batch to finished unit
Packing inspection and photo record before container loading

Customization Options

Communication protocol matched to the inverter brand on site
Enclosure finish and customer branding
Mounting variant - wall, floor or rack - for the available space
Label, manual and packaging language for the destination market

Comparison

How It Compares With The Alternatives

Lead-acid batteries	Usable depth of discharge is far higher, so a lead-acid bank has to be specified much larger for the same usable energy - and replaced far sooner.
NMC lithium batteries	LiFePO4 gives up some energy density and gains thermal stability and cycle life, which is the trade most stationary storage buyers want.
A larger single battery	Parallel modules let the system be sized for today's load and extended later, instead of paying up front for capacity that idles for two years.

Use Guide

Getting This Product Right On Site

1
Set charge and discharge limits in the inverter to match the battery's rated current
2
Check the state-of-charge reporting and firmware version at each annual service visit
3
Confirm the inverter model and communication protocol before ordering, so the handshake is verified not assumed
4
Mount in a dry, ventilated space within the stated operating temperature range
5
Torque terminals to the value in the manual and re-check after the first week of cycling

Lovsun 12V 100Ah LiFePO4 Battery - Buyer Questions

Can we order with our own branding

Yes. Enclosure finish, nameplate and packaging can carry your brand. Minimum quantities apply for custom labelling.

What temperature range can the battery work in

The operating and storage temperature ranges are in the specification table. Charging has a narrower window than discharging, which matters for unheated installations.

Which inverters is this battery compatible with

It communicates over CAN and RS485 and is used with common hybrid inverter brands. Tell us the exact inverter model you plan to use and we will confirm the protocol before you order.

What is the minimum order quantity

One unit for a sample or a single installation. Container quantities are priced for distributors and installers ordering to stock.

How many units can be connected in parallel

Parallel capability is stated in the specification table for this model. Beyond that count, capacity is added with a second bank under separate inverter control.

What is the warranty and what does it cover

Warranty terms are confirmed in writing with the quotation and depend on the model and destination market. Ask for the warranty statement before you place the order.