We reply to enquiries within 12 hours · Mon-Sat 08:30-18:00 GMT+8[email protected]+86 18155106856
Solar Inverters and PCS

Growatt MAC 15/20/25/30/36KTL3-XL 3 Phase 220V On Grid Inverter

Three phase

Growatt MAC 15/20/25/30/36KTL3-XL 3 Phase 220V On Grid Inverter converts Three phase of PV output for direct grid export. Multiple MPP trackers let one unit serve roof sections at different orientations without splitting the array across more inverters.

Key Benefits

What This Product Changes On Your Project

  • Grid protection built in - anti-islanding, insulation monitoring, residual-current monitoring and surge protection
  • Outdoor-rated enclosure that can be wall-mounted next to the array instead of inside a plant room
  • Standard monitoring interfaces so the plant reports into existing supervisory software
  • Firmware grid codes for export limitation and reactive power control, which is what most utility connection approvals ask for
  • Multiple MPP trackers, so roof sections at different pitches and orientations do not have to share one string

Application Scenarios

  • Off-grid and weak-grid sites running PV, battery and generator together
  • Industrial microgrids switching between grid-tied and island operation
  • Commercial rooftop PV exporting to the utility under a net-metering or feed-in scheme
  • Ground-mount arrays where several sub-arrays share one inverter station
  • Solar-plus-storage retrofits on sites that already have PV

Who It Is For

  • System integrators building solar-plus-storage and microgrid systems
  • Asset owners standardising on one inverter platform across a portfolio
  • O&M providers who need spares and firmware support from one source
  • PV installers and EPC contractors specifying inverters for grid connection approval

Problems It Solves

  • Grid codes that reject an installation without export limitation and reactive power control
  • Conversion loss and heat derating that quietly erode plant yield in summer
  • Separate PV and storage conversion stages that double the failure points and the commissioning time
  • Monitoring that cannot be read by the customer's existing supervisory system

Technical Features

  • RS485 and wireless monitoring interfaces
  • Independent MPP trackers, each tracking its own string set
  • Transformerless conversion topology
  • DC switch, DC reverse-polarity protection and surge protection on both DC and AC sides
  • Anti-islanding, grid monitoring and residual-current monitoring for utility approval
Specifications

Published Specification Data

These figures come from the manufacturer datasheet for this model. Where a value you need is not listed, ask for the full datasheet rather than assuming a typical figure.

System voltage220 V
Grid connectionThree phase
BrandGrowatt

Quality Control

  • Incoming inspection of cells, power electronics and structural parts before assembly
  • Capacity and internal-resistance grading so cells within a pack are matched
  • Full-function test on every finished unit, not a sample from the batch
  • Insulation and dielectric withstand testing on completed assemblies
  • Aged and burn-in run before packing, so early-life failures happen in the factory

Customization Options

  • Customer branding on packaging and documentation
  • Grid code and AC voltage configuration for the destination market
  • Monitoring accessory selection - Wi-Fi, GPRS or RS485 to an existing logger
  • DC connector type to match the array already specified
Comparison

How It Compares With The Alternatives

Separate PV inverter plus battery inverterOne conversion stage means one set of wiring, one monitoring platform and one warranty, at the cost of less freedom to mix brands later.
A microinverter arrayString conversion costs less per kW at commercial scale; microinverters win on complex shading and per-module monitoring.
An oversized single inverterSeveral MPP trackers serve differently oriented roof sections without splitting the array, so one unit covers what would otherwise need two.
Use Guide

Getting This Product Right On Site

  1. 1

    Commission the monitoring interface at the same visit, not as a follow-up trip

  2. 2

    Record the firmware version so a later fleet update can be planned

  3. 3

    Verify the array string voltage against the MPPT window at the site's record low temperature

  4. 4

    Select the grid code for the destination market before energising

  5. 5

    Mount out of direct afternoon sun and leave the clearance the manual specifies for airflow

Growatt MAC 15/20/25/30/36KTL3-XL 3 Phase 220V On Grid Inverter - Buyer Questions

What monitoring is included
Standard interfaces are listed in the specification table. Wireless and cellular loggers are ordered as accessories where the site has no local network.
What is the warranty term
The standard term and the available extension are confirmed in writing with the quotation, as they vary by model and market.
How is the inverter packed and shipped
Individually boxed and palletised for container shipping. We confirm pallet quantity and container loading plan with the order.
Which grid codes can this inverter be set to
Grid code is selected at commissioning for the destination market. Tell us the country and utility and we will confirm the setting is supported before shipment.
Can this inverter work with batteries from another brand
Battery compatibility depends on the communication protocol. Send the battery model you intend to pair and we will confirm the handshake rather than leave it to the site to find out.
What is the lead time and minimum order quantity
One unit is enough for a sample or a single job. Lead time depends on model and quantity and is confirmed with the quotation.

Request A Quote For Growatt MAC 15/20/25/30/36KTL3-XL 3 Phase 220V On Grid Inverter

Tell us the quantity, the destination market and the application. We reply within 12 hours with lead time, certification and pricing.