We reply to enquiries within 12 hours · Mon-Sat 08:30-18:00 GMT+8[email protected]+86 18155106856
Lithium Battery

15KWh Floor-mounted LifePO4 Energy Storage Battery

15 kWh

15KWh Floor-mounted LifePO4 Energy Storage Battery is a floor-standing LiFePO4 storage battery rated at 15 kWh, sized for homes and small commercial sites that have floor space but no suitable load-bearing wall.

Standards Referenced On The Original Datasheet

  • UN38.3
  • CE
  • MSDS
Key Benefits

What This Product Changes On Your Project

  • Standard CAN and RS485 communication for inverter handshake, rather than a closed protocol that locks the buyer to one brand
  • Usable depth of discharge that does not have to be derated the way lead-acid does
  • No electrolyte maintenance, no equalisation charging and no ventilation requirement
  • LiFePO4 chemistry - a flatter thermal profile and a longer cycle life than NMC at the same usable energy
  • Integrated BMS with cell balancing, over-current, over-temperature and short-circuit protection

Application Scenarios

  • Telecom and monitoring cabinets where a site visit is expensive
  • Off-grid cabins, farms and workshops running entirely on PV and storage
  • Small commercial premises cutting evening peak import
  • Marine, RV and mobile installations replacing lead-acid banks
  • Residential solar self-consumption, storing midday PV for the evening load

Who It Is For

  • Off-grid property owners sizing a standalone power system
  • Solar installers specifying residential and light commercial storage
  • Distributors and wholesalers stocking storage batteries for an installer base
  • System integrators building backup and off-grid packages

Problems It Solves

  • Closed inverter-battery protocols that force a whole-system replacement to change one component
  • Lead-acid banks that have to be oversized because only part of the capacity is usable
  • Replacement cycles every few years and the disposal cost that comes with them
  • Solar output exported at a low feed-in tariff and bought back at a high retail one

Technical Features

  • Enclosure and terminal layout designed for a single-installer fit
  • State-of-charge indication at the unit, not only through the inverter app
  • LiFePO4 cells with an integrated BMS handling balancing and protection
  • Over-voltage, under-voltage, over-current, over-temperature and short-circuit protection
  • CAN and RS485 interfaces for inverter handshake and state-of-charge reporting
Specifications

Published Specification Data

These figures come from the manufacturer datasheet for this model. Where a value you need is not listed, ask for the full datasheet rather than assuming a typical figure.

Energy capacity15 kWh
Battery chemistryLiFePO4
Nominal voltage48V
Voltage range42V~54.75V
Nominal capacity314Ah
CommunicationRS485 /CAN
Design life15 years

Quality Control

  • Incoming inspection of cells, power electronics and structural parts before assembly
  • Capacity and internal-resistance grading so cells within a pack are matched
  • Full-function test on every finished unit, not a sample from the batch
  • Insulation and dielectric withstand testing on completed assemblies
  • Aged and burn-in run before packing, so early-life failures happen in the factory

Customization Options

  • Communication protocol matched to the inverter brand on site
  • Enclosure finish and customer branding
  • Mounting variant - wall, floor or rack - for the available space
  • Label, manual and packaging language for the destination market
Comparison

How It Compares With The Alternatives

Lead-acid batteriesUsable depth of discharge is far higher, so a lead-acid bank has to be specified much larger for the same usable energy - and replaced far sooner.
NMC lithium batteriesLiFePO4 gives up some energy density and gains thermal stability and cycle life, which is the trade most stationary storage buyers want.
A larger single batteryParallel modules let the system be sized for today's load and extended later, instead of paying up front for capacity that idles for two years.
Use Guide

Getting This Product Right On Site

  1. 1

    Mount in a dry, ventilated space within the stated operating temperature range

  2. 2

    Torque terminals to the value in the manual and re-check after the first week of cycling

  3. 3

    Set charge and discharge limits in the inverter to match the battery's rated current

  4. 4

    Check the state-of-charge reporting and firmware version at each annual service visit

  5. 5

    Confirm the inverter model and communication protocol before ordering, so the handshake is verified not assumed

15KWh Floor-mounted LifePO4 Energy Storage Battery - Buyer Questions

What temperature range can the battery work in
The operating and storage temperature ranges are in the specification table. Charging has a narrower window than discharging, which matters for unheated installations.
Which inverters is this battery compatible with
It communicates over CAN and RS485 and is used with common hybrid inverter brands. Tell us the exact inverter model you plan to use and we will confirm the protocol before you order.
What is the minimum order quantity
One unit for a sample or a single installation. Container quantities are priced for distributors and installers ordering to stock.
How many units can be connected in parallel
Parallel capability is stated in the specification table for this model. Beyond that count, capacity is added with a second bank under separate inverter control.
What is the warranty and what does it cover
Warranty terms are confirmed in writing with the quotation and depend on the model and destination market. Ask for the warranty statement before you place the order.
How is the battery packed for export
Units are packed to UN38.3 transport requirements for lithium batteries, with the documentation the carrier needs. Confirm air or sea freight when you enquire, as the requirements differ.

Request A Quote For 15KWh Floor-mounted LifePO4 Energy Storage Battery

Tell us the quantity, the destination market and the application. We reply within 12 hours with lead time, certification and pricing.