Plain MDF 2
Plain MDF in the thicker gauges of the 2.5-36 mm range, for structural furniture components and worktop substrates where board stiffness matters.
Product Overview
Plain MDF in the thicker gauges of the 2.5-36 mm range, for structural furniture components and worktop substrates where board stiffness matters.
Who It Is For
- Kitchen and worktop manufacturers
- Furniture factories producing shelving and case goods
- Joinery workshops
Application Scenarios
- Worktop and counter substrates
- Structural furniture components and shelving
- Door blanks and thick panel work
At a glance
- Category
- MDF
- Division
- Plywood
- Variant
- Thicker gauge
Problems It Solves
- Thick board sagging on long shelf spans when the density is below specification
- Edge quality on thick board determining whether it can be profiled
- Weight per pallet limiting how much can be handled manually
Why Buyers Choose This Product
Density held at 750-850 kg/m3, which determines both shelf stiffness and edge machining quality
Available up to 36 mm from the same programme as thin stock
Grade specified as furniture or commercial to suit the end use
Technical Specification
The 8 fields below are the manufacturer's published specification for Plain MDF 2. Anything the manufacturer does not publish is marked TBC rather than estimated.
| Name | Plain MDF |
|---|---|
| Size | 4” x 8” x 2.5MM -36MM |
| Glue | E0/E1/E2/MR |
| Material | Poplar, Pine. Hardwood |
| Density | 750 -850kg /m3 |
| Grade | Furniture or Commercial |
| Color | Green or White |
| Package | Pallet Packing |
Comparison With Other Products
Thicker MDF holds a profiled edge better than particle board of the same thickness, which tends to break out along the chip line.
Use Guide
- Support long shelf spans at the centre — MDF creeps under sustained load
- Use a router with a profiling cutter rather than a saw for moulded edges
- Pre-drill for screws into the edge to avoid splitting
Questions About Plain MDF 2
What is the maximum thickness?
36 mm.
Which grades are available?
Furniture or commercial grade.
Is the board suitable for a worktop substrate?
It is used as a substrate for laminated worktops. For wet areas, confirm the glue class required for your market.
Need a Quotation for Plain MDF 2
Send the quantity and destination port and a price with a loading plan comes back. Specifications and certificate copies are provided before you commit.