Model JD2140CH
C07 Wall Sconce
C07 Wall Sconce is a wall-mounted light with a steel base and fabric shade, 300 mm wide, 270 mm tall, extending 150 mm from the wall. It uses a single COB LED lamp at 3.5W, 3000K, and is rated IP20 for dry indoor use. The chrome finish is factory applied. It is designed for use in corridors, hallways and residential interiors where a low-profile, evenly diffused light source is needed. Model number is JD2140CH.
- Width300mm
- O/A Height270mm
- MaterialSteel base + fabric shade
- FinishChrome
- Light SourceCOB LED 3.5W 3000K
- Lamp holderE14
Custom size and finish are quoted against your drawing. Send the ceiling height or room dimension with your enquiry.
What This Model Gives You
- Single COB LED at 3.5W provides focused, even illumination without glare
- Fabric shade diffuses light softly, avoiding harsh reflections on walls
- 150 mm extension keeps the light from pressing against the wall
- Chrome finish is factory applied so no site touch-up is needed
- IP20 rating confirms suitability for dry indoor environments only
- Custom size available to match your wall layout or spacing requirements
What Goes Wrong Without It
- A bulky sconce with a glass or metal shade can create glare on adjacent walls
- Multiple small lights in a corridor increase installation points and wiring complexity
- Standard sconces often have a fixed size that doesn’t match a specific wall layout
- A light that extends too far into the walkway can be a tripping hazard
- A high-wattage light in a small corridor creates unnecessary heat and light spill
Recorded Specification
| Width | 300mm |
|---|---|
| O/A Height | 270mm |
| Wall Extension | 150mm |
| Material | Steel base + fabric shade |
| Finish | Chrome |
| Lamp holder | E14 |
| Light Source | COB LED 3.5W 3000K |
| Ingress Protection | IP20 |
- Custom size available
- Other finish available
Materials
- Fabric shade for soft light diffusion and visual warmth
- Chrome finish applied at factory level for consistent appearance
Technical Features
- Steel base with fabric shade, 300 mm wide, 270 mm tall, extending 150 mm from the wall
- Single COB LED lamp at 3.5W, 3000K, E14 lamp holder
- IP20 rating for dry indoor use only
- Chrome finish as standard, other finishes available on request
- Custom size available on most items, including width, height and extension
- Designed for wall mounting in corridors, hallways and residential interiors
Application Scenarios
Typical Locations
- Hotel corridor where a low-profile light is needed without obstructing the wall
- Residential hallway with limited wall space and a need for even ambient light
- Villa entrance with a narrow wall section and a requirement for a discreet light
- Retail store back corridor where a clean, minimal fixture is preferred
- Private apartment landing where a single sconce must provide functional lighting
Who It Is For
- Hotel FF&E buyers specifying wall lighting for corridors and hallways
- Interior contractors fitting out residential buildings and villas
- Retailers standardising lighting in back-of-house areas
- Developers specifying consistent lighting for multiple units
- Lighting wholesalers adding a compact, low-wattage sconce to their range
Fittings Of This Type On Site
What Can Be Changed
- Custom width, height or extension to match your wall layout
- Other finish available on request, including chrome and alternatives
- Production to your own approved drawing if you are working to an interior design package
How An Order Runs
- You send a drawing or the dimensions you need for the sconce
- We re-draw the item based on your input and return it for your written approval
- Production runs to the approved drawing before any material is cut
- The steel base is formed and finished, then the fabric shade is fitted
- The assembled item is checked against the approved drawing before packing
- Final QC checks are made against the approved drawing before shipment
What Is Checked Before Packing
- Checked against the approved drawing before packing
- Dimensions verified against the signed specification
- Finish and colour checked across the item for consistency
- The lamp holder and light source are checked against the specification recorded for this model
How It Compares With The Alternatives
| Alternative | Honest trade off |
|---|---|
| Glass wall sconce | Glass is more reflective and shows dust, fabric diffuses light more evenly and hides minor imperfections |
| Multiple small wall lights | A single C07 reduces the number of ceiling penetrations and simplifies alignment |
| Standard catalogue sconce | This model allows custom size and finish, while standard items are fixed in dimension and finish |
Before and After Installation
- Measure the wall space and confirm the extension before ordering to avoid interference with furniture
- Use only in dry indoor areas as the fixture is rated IP20
- Confirm whether the lamp is included at order stage or if you are supplying it on site
- Clean the fabric shade with a dry soft cloth, not with solvent or damp wiping
- Avoid mounting in areas with high vibration or frequent contact
Wall Sconce Questions
Can you change the size to fit our wall layout?
Yes. Custom size is available on this model. Send us the dimensions you need and we will re-draw it for your approval before production.
Can we have it in a finish other than chrome?
Yes. Chrome is the standard finish. Other finishes are available on request. Send us the reference and we will quote accordingly.
Is the lamp included in the price?
Confirm at order stage whether you want the COB LED lamp supplied or if you are lamping on site.
Is it suitable for a bathroom or a covered terrace?
No. This sconce is rated IP20, which is for dry indoor use only. Ask us for an alternative if the location is damp or exposed.
We are working to an interior designer's drawing, can you build to it?
Yes. Customised products are made to your approved drawings. Send the drawing and our engineer team will return a production drawing for your written sign-off.
How do we confirm the finish and size?
Send your requirements via email or WhatsApp. We will provide a revised drawing for your approval before starting production.
Ask For a Price On Wall Sconce
Quote requests on model JD2140CH are answered against the specification you send. Tell us the quantity, the finish and any custom size.