Model JD2143BR-1D
C02 Shell Wall Sconce
C02 Shell Wall Sconce is a single-light wall sconce with a steel base and a clear acrylic shade, 80 mm wide and 280 mm tall. The brass finish gives a warm metallic tone, and the SMD LED source emits light at 3000 to 45000K, dimmable. It is designed for dry indoor walls where a slim, modern light fixture is needed without a ceiling fixture. Model number is JD2143BR-1D.
- Width80mm
- O/A Height280mm
- MaterialSteel base + clear acrylic shade
- FinishBrass
- Light SourceSMD LED 20W
- Ingress ProtectionIP20
Custom size and finish are quoted against your drawing. Send the ceiling height or room dimension with your enquiry.
What This Model Gives You
- Single-light design fits narrow wall spaces without taking up visual width
- Clear acrylic shade allows full light output without diffusion loss
- Brass finish provides a consistent metallic look with no visible seams
- Dimmable SMD LED source supports ambient lighting control in residential and hospitality settings
- IP20 rating confirms suitability for dry indoor environments only
- Custom size available to match exact wall cutout or spacing requirements
What Goes Wrong Without It
- A bulky ceiling fixture takes up visual space in a narrow wall area
- A large sconce with a diffused shade reduces light output and creates glare
- Standard sconces do not match a specific wall cutout or spacing in a design
- A non-dimmable light cannot adapt to different times of day or mood settings
- A fixture with no custom size option must be installed at a fixed location
Recorded Specification
| Width | 80mm |
|---|---|
| O/A Height | 280mm |
| Material | Steel base + clear acrylic shade |
| Finish | Brass |
| Light Source | SMD LED 20W |
| Colour Temperature | 3000K-4500K (dimmable) |
| Ingress Protection | IP20 |
- Custom size available
- Other finish available
Materials
- Steel base for structural support and heat dissipation
- Clear acrylic shade for unobstructed light transmission
- Brass finish applied to the steel base, with other finishes available on request
Technical Features
- Single-light wall sconce with steel base and clear acrylic shade
- SMD LED light source, 20W total, dimmable across 3000 to 45000K
- Brass finish as standard, with other finishes available on request
- 80 mm width and 280 mm overall height, custom size available
- IP20 rating for dry indoor use only
- Lamp holder is built into the fixture, no external fitting required
Application Scenarios
Typical Locations
- Hotel guest room wall beside a bed where a low-profile light is needed
- Residential hallway with limited wall space and no ceiling access
- Retail store display wall where a subtle light enhances product visibility
- Villa bedroom wall where a single sconce is used for reading light
- Lobby wall in a commercial building where a clean line of light is preferred
Who It Is For
- Hotel FF&E buyers specifying wall lighting for guest rooms and corridors
- Interior contractors fitting out high-end apartments and villas
- Retailers standardising lighting in store chains with consistent fixtures
- Developers specifying lighting for residential units with tight wall layouts
- Lighting wholesalers adding a slim wall sconce to their product range
Fittings Of This Type On Site
What Can Be Changed
- Custom size available to match your wall cutout or spacing
- Other finish available on request, confirm reference at order stage
- Production to your own approved drawing if working to a design package
How An Order Runs
- You send a drawing or the dimensions for the wall sconce to be built
- A drawing is re-drawn and returned for your written approval before production starts
- The steel base is fabricated and finished in the requested finish
- The clear acrylic shade is fitted and aligned with the lamp holder
- The assembled item is checked against the approved drawing before packing
What Is Checked Before Packing
- Checked against the approved drawing before packing
- Dimensions verified against the signed specification
- Finish and colour checked across the item
- The lamp holder and light source are checked against the specification recorded for this model
How It Compares With The Alternatives
| Alternative | Honest trade off |
|---|---|
| Wall sconce with frosted glass shade | Frosted glass diffuses light and reduces glare, but clear acrylic allows full brightness and better visibility of the fixture |
| Ceiling-mounted pendant with similar light output | A pendant takes ceiling space and may not fit in a narrow wall area, while this sconce is wall-mounted and compact |
| Sconce with multiple light positions | Multiple lights increase cost and complexity, while this single-light model is simpler and easier to install |
Before and After Installation
- Confirm the wall cutout size and mounting height before ordering
- Use only in dry indoor environments due to IP20 rating
- Ensure the dimmer used is compatible with SMD LED drivers
- Clean the acrylic shade with a dry soft cloth to avoid scratches
- Do not install in bathrooms, kitchens, or outdoor areas
Shell Wall Sconce Questions
Can you make it in a different finish?
Yes. Brass is the standard finish, but other finishes are available. Send the finish reference to confirm availability.
Is the size adjustable?
Yes. Custom size is available. Send the required width and height, and we will re-draw the sconce for your approval before production.
Are the lamps included?
The sconce is built with the SMD LED source, but confirm at order stage whether you want the lamps supplied or if you are installing them on site.
Can it be used in a bathroom?
No. This sconce is rated IP20, which is for dry indoor use only. Ask us for a damp-rated alternative if needed.
Can you build to our drawing?
Yes. Customised products are produced to your approved drawing. Send the drawing and our engineer team will return a production drawing for your written approval.
Is the light dimmable?
Yes. The SMD LED source is dimmable across 3000 to 45000K. Confirm the dimmer type at order stage to ensure compatibility.
Other Wall Sconces
Ask For a Price On Shell Wall Sconce
Quote requests on model JD2143BR-1D are answered against the specification you send. Tell us the quantity, the finish and any custom size.