Model JD2127CH
A19 LED Flush Mounting
A19 is a 390 mm wide flush mounting ceiling light with an opal white glass shade and a chrome finish, designed for dry indoor spaces with moderate moisture exposure. The fitting is 150 mm in overall height and uses SMD LED lighting at 18W with a 4000K colour temperature. It is specified for corridors, stairwells, and residential hallways where a low-profile, even light source is needed without a hanging drop. Model number is JD2127CH.
- Width390mm
- O/A Height150mm
- MaterialMetal + Opal white glass shade
- FinishChrome
- Light SourceSMD LED
- Ingress ProtectionIP44
Custom size and finish are quoted against your drawing. Send the ceiling height or room dimension with your enquiry.
What This Model Gives You
- Flush mounting saves ceiling height and avoids clearance issues in low-ceiling rooms
- Opal white glass diffuses light evenly without glare, suitable for corridors and hallways
- IP44 rating allows use in areas with light moisture, such as bathrooms with ventilation
- 18W SMD LED provides consistent light output with low energy use across the fitting
- Chrome finish is factory applied so no site touch-up is needed after installation
- Custom size available to match exact ceiling or wall dimensions before production
What Goes Wrong Without It
- A hanging pendant or chandelier takes up vertical space in a low ceiling and risks head clearance
- Standard flush mounts are often too small to cover a wide corridor or hallway evenly
- Glare from bare LEDs is common in narrow spaces, but opal glass diffuses the light
- Moisture in bathrooms or kitchens requires a higher ingress protection than IP20
- A one-size-fits-all fixture often does not match the exact dimensions of a project space
Recorded Specification
| Width | 390mm |
|---|---|
| O/A Height | 150mm |
| Material | Metal + Opal white glass shade |
| Finish | Chrome |
| Light Source | SMD LED |
| Wattage | 18W 4000K |
| Ingress Protection | IP44 |
| Net Weight | 1.2 kg |
| Finish option | Chrome | Gold | others |
- Custom size Available
Materials
- Metal frame and mounting plate for structural support
- Opal white glass shade for even light diffusion and reduced glare
- Chrome finish as standard, with gold and other finishes available to order
Technical Features
- 390 mm overall width with a 150 mm overall height, flush-mounted to the ceiling
- Opal white glass shade over a metal frame, providing even light diffusion
- SMD LED light source at 18W with a 4000K colour temperature
- IP44 rating suitable for dry indoor areas with occasional moisture exposure
- Chrome finish as standard, with gold and other finishes available on request
- Net weight of 1.2kgs, suitable for standard ceiling mounting without reinforcement
Application Scenarios
Typical Locations
- Hotel corridor with a raised ceiling where a hanging fixture would interfere with headroom
- Residential hallway with limited vertical clearance and a need for even ambient lighting
- Apartment stairwell where a low-profile ceiling light avoids the risk of bumping heads
- Hospitality guest room entryway where a flush fitting blends into the ceiling line
Who It Is For
- Hotel FF&E buyers specifying ceiling lighting for corridors and hallways
- Interior contractors fitting out residential developments with tight ceiling heights
- Retail chain buyers standardising lighting in back-of-house corridors
- Developers specifying low-profile lighting for apartment units with standard ceiling heights
- Lighting wholesalers building a range of flush mount options for their catalogue
Fittings Of This Type On Site
What Can Be Changed
- Custom overall width and height available to match your ceiling or wall dimensions
- Finish in chrome, gold or another finish on request
- Production to your own approved drawing if you are working to an interior design package
How An Order Runs
- You send a drawing or the ceiling dimensions and the fitting is re-drawn to suit
- Drawings are returned for your written approval before anything is cut
- The metal frame is fabricated and the opal white glass shade is fitted
- The assembled item is checked against the approved drawing before packing
- The fitting is checked against the approved drawing and packed
What Is Checked Before Packing
- Checked against the approved drawing before packing
- Dimensions verified against the signed specification
- Finish and colour checked across the item for consistency
- The lamp holder and light source are checked against the specification recorded for this model
How It Compares With The Alternatives
| Alternative | Honest trade off |
|---|---|
| Standard flush mount with clear glass shade | Clear glass can cause glare and hot spots; opal white glass diffuses light evenly |
| Recessed ceiling light | Recessed requires a ceiling cutout and electrical access; flush mount fits into standard ceiling |
| Hanging pendant with similar width | A pendant adds vertical height and risk of head clearance; flush mount stays low |
Before and After Installation
- Measure the ceiling space and confirm the width and height before ordering
- Ensure the ceiling can support the fitting's weight and has a suitable electrical box
- Use the fitting only in dry indoor areas; it is rated IP44 but not for outdoor or wet locations
- Avoid installing in areas with high dust or frequent cleaning where the glass may be damaged
- Clean the glass shade with a dry soft cloth; do not use abrasive or solvent-based cleaners
LED Flush Mounting Questions
Can you change the size to fit our ceiling dimensions?
Yes. Custom size is available on this model. Send us the width and height you need, and the fitting will be re-drawn before production.
Can it be supplied in gold instead of chrome?
Yes. Chrome is the standard finish on this model and gold is available. Other finishes can be quoted if you send the reference.
Is it suitable for a bathroom or a kitchen?
Yes, it is rated IP44, which allows use in areas with moderate moisture like bathrooms and kitchens. Confirm with us if the location has high humidity or steam.
Are the LEDs included in the price?
The fitting is supplied with the SMD LED module installed. Confirm at order stage whether you want the module included or if you are installing it on site.
Can we build to our own drawing?
Yes. Customised products are made to your approved drawings. Send the drawing and our engineer team will return a production drawing for your written approval.
What is the weight and does it need special mounting?
The fitting weighs 1.2kgs. It is designed for standard ceiling mounting. Confirm with your electrician that the ceiling box can support the load.
Ask For a Price On LED Flush Mounting
Quote requests on model JD2127CH are answered against the specification you send. Tell us the quantity, the finish and any custom size.