Model JD2126CH
A18 LED Flush Mounting
A18 LED Flush Mounting is a 300 mm wide ceiling light with a white glass shade and chrome finish, designed for low-profile installations in corridors, hallways, and residential ceilings. It uses SMD LED lighting at 18W with a 4000K colour temperature, providing even illumination without glare. The fitting is rated IP44 for damp indoor environments. Model number is JD2126CH.
- Width300mm
- O/A Height86mm
- MaterialMetal + Glass shade with white colour
- FinishChrome
- Light SourceSMD LED
- Ingress ProtectionIP44
Custom size and finish are quoted against your drawing. Send the ceiling height or room dimension with your enquiry.
What This Model Gives You
- 300 mm width fits standard corridor and hallway ceilings without overhang
- IP44 rating allows use in bathrooms, kitchens and covered balconies
- SMD LED at 18W delivers consistent light with low energy use
- White glass shade diffuses light evenly without hotspots
- Chrome finish is factory applied so no site touch-up is needed
- Low profile at 86 mm O/A height suits ceilings with limited clearance
What Goes Wrong Without It
- A standard pendant hangs too low in a corridor with a raised ceiling and risks head contact
- A recessed ceiling light requires a deep cavity that is not available in all buildings
- A high-profile fixture creates a visual barrier in a narrow hallway
- A non-IP44 light cannot be used in a bathroom or kitchen without risk of damage
- A single light source in a corridor creates dark zones between fixtures
Recorded Specification
| Width | 300mm |
|---|---|
| O/A Height | 86mm |
| Material | Metal + Glass shade with white colour |
| Finish | Chrome |
| Light Source | SMD LED |
| Wattage | 18W 4000K |
| Ingress Protection | IP44 |
| Finish option | Chrome | Gold | others |
- Custom size Available
Materials
- White glass shade for light diffusion and clean visual appearance
- Chrome finish as standard, with gold and other finishes available on request
Technical Features
- 300 mm overall width with 86 mm overall height for low-profile fit
- Metal frame with white glass shade for even light diffusion
- SMD LED light source at 18W, 4000K colour temperature
- IP44 rating for damp indoor environments
- Chrome finish as standard, with gold and other finishes available
- Custom size available on request for width or height
Application Scenarios
Typical Locations
- Hotel corridor with a raised ceiling where a flush fitting avoids head clearance issues
- Residential hallway with limited ceiling height and no space for a pendant
- Kitchen ceiling in a residential building where moisture is present
- Covered balcony in a villa that needs indoor-rated lighting
- Hospitality reception area where a discreet ceiling light is preferred over a feature fixture
Who It Is For
- Hotel FF&E buyers specifying ceiling lights for corridors and bathrooms
- Residential developers standardising lighting in apartment blocks
- Interior contractors fitting out villas with consistent ceiling solutions
- Wholesalers building a range of IP44-rated flush lights for their catalogue
- Commercial interiors teams needing low-profile lighting in tight spaces
Fittings Of This Type On Site
What Can Be Changed
- Custom overall width or height available to match your ceiling space
- Finish in chrome, gold or another finish on request
- Production to your own approved drawing if you are working to an interior design package
How An Order Runs
- You send a drawing or the dimensions for the ceiling space
- The drawing is re-drawn and returned for your written approval
- Production runs to the approved drawing
- QC checks the item against the approved drawing before packing
- The fitting is packed after final verification
What Is Checked Before Packing
- Checked against the approved drawing before packing
- Dimensions verified against the signed specification
- Finish and colour checked across the item
- The lamp holder and light source are checked against the specification recorded for this model
How It Compares With The Alternatives
| Alternative | Honest trade off |
|---|---|
| Standard recessed ceiling light | Recessed requires a deep cavity; this flush fitting fits where space is limited |
| Pendant light with a glass shade | Pendant hangs lower and may interfere with head clearance; this flush fitting stays flush with the ceiling |
Before and After Installation
- Measure the ceiling space and confirm the width and height before ordering
- Ensure the fitting is installed in a dry or damp indoor environment only, as it is IP44 rated
- Use dimmable SMD LED lamps if the room is used at different times of day
- Clean the glass shade with a soft dry cloth; avoid abrasive cleaners or solvents
- Do not install in outdoor or fully exposed areas, even if covered
LED Flush Mounting Questions
Can you change the width or height to fit our ceiling?
Yes. Custom size is available on this model. Send us the dimensions you need and we will re-draw the fitting for your approval before production.
Is the glass shade breakable?
The glass is standard white glass used in ceiling lights. It is not shatterproof. Handle with care during installation and avoid impact after fitting.
What lamps does it take and are they included?
It uses SMD LED at 18W, 4000K. Confirm at order stage whether you want lamps supplied or if you are lamping on site.
Can we have it in gold instead of chrome?
Yes. Chrome is the standard finish and gold is available. Other finishes can be quoted if you send the reference.
Is it suitable for a bathroom or a covered terrace?
Yes. It is rated IP44, which allows use in bathrooms and covered terraces. Confirm the location with us before ordering.
We are working to an interior designer's drawing, can you build to it?
Yes. Customised products are made to your approved drawings. Send the drawing and our engineer team will return a production drawing for your written approval.
Ask For a Price On LED Flush Mounting
Quote requests on model JD2126CH are answered against the specification you send. Tell us the quantity, the finish and any custom size.