Tuya WIFI Smart Circuit Breakers
Thermal Actuated Condensed Aerosol Fire Suppression Device
The Thermal Actuated Condensed Aerosol Fire Suppression Device is a compact, self-activated fire protection unit...
View Product
Tuya WIFI Smart Circuit Breakers
4P Tuya Smart Wifi Circuit Breaker
The 4P Tuya Smart WiFi Circuit Breaker is a four-pole breaker for AC 400V three-phase circuits that maintains...
Product Overview
What This Model Does
The 4P Tuya Smart WiFi Circuit Breaker is a four-pole breaker for AC 400V three-phase circuits that maintains conventional overload, short-circuit and isolation protection while adding remote switching over WiFi. It operates on AC 50/60Hz, covers rated currents from 16A to 125A, and is compliant with GB10963.1 and IEC60898-1. It pairs with the Tuya SmartLife app to enable remote on/off, timing, delay and cycle switching from any location with internet access. For installers and system integrators, it eliminates the need for site visits to reset tripped breakers and allows smart control of high-current devices without additional controllers.
Key Benefits
- Enables remote on/off, timing, delay and cycle switching of three-phase circuits from any location with internet access
- Maintains mechanical overload, short-circuit and isolation protection independent of network status
- Smart reclosing automatically restores power after a trip, reducing site visits for unattended equipment
- Replaces separate timers, contactors and PLCs by integrating switching logic into the app
- Supports Amazon Alexa, Google Home and IFTTT for voice and scene-based control without extra hardware
- Manual operation and a safety switch remain functional during network outages
Who It Is For
- Electrical wholesalers adding smart circuit breakers to their conventional MCB product line
- Panel builders specifying remote-controlled outgoing circuits in distribution boards
- Facility and property managers overseeing breakers across scattered or remote sites
- Smart home and building automation brands sourcing a Tuya-compatible breaker for integration
- Solar and pump installers needing timed or cycled switching without a separate PLC
Problems It Solves
- An engineer must travel to site simply to reset a tripped breaker after a nuisance trip
- Timers and contactors add extra components and wiring to achieve scheduled switching
- Tenant or seasonal supply cannot be switched off without physical access to the distribution board
- Loads continue running outside operating hours because no one is present to switch them off
- Smart home projects stall when the electrical panel lacks a controllable switching device
Application Scenarios
- Street lighting circuits controlled by daily timers instead of astronomical clocks
- Farm irrigation and water pumps cycled remotely across a growing season
- Rental housing and student dormitories where power supply is switched per tenancy
- Municipal works and enterprise sites with breakers distributed across multiple buildings
- Water heaters and floor heating systems scheduled to run during off-peak hours
Technical Features
How It Is Built
- Four poles for AC 400V three-phase circuits at 50/60Hz
- Rated current from 16A to 125A with a 125A rack rating
- Type C instantaneous trip characteristic and 6KA rated short-circuit breaking capacity
- 6KV rated impulse withstand voltage and pollution degree 2
- IP20 protection and a specified use temperature of -25 degrees C to +65 degrees C
- Remote control from a smartphone over WiFi or 3G/4G data connection
- Mechanical life 10,000 operations and electrical life 6,000 operations
Materials and Construction
- Silver-alloy contacts with a thermal-magnetic trip mechanism
- Integrated WiFi control module inside the breaker body
Quality Control
- Trip characteristic verified against GB10963.1 and IEC60898-1 requirements
- Short-circuit breaking capacity confirmed at the rated 6KA
- Mechanical operation checked against the 10,000-operation design life
- App pairing and remote switching tested on every finished unit
- Insulation and dielectric withstand test before packing
Specifications
Stated Ratings for This Model
| Standards Compliant | GB10963.1, IEC60898-1 |
|---|---|
| Rated Voltage | AC 110V/230V for 1P and 2P, AC 400V for 3P and 4P |
| Frequency | 50/60Hz |
| Number of Poles | 1P, 2P, 3P, 4P |
| Rated Current | 16A, 20A, 25A, 32A, 40A, 63A, 80A, 100A, 125A |
| Rack Rated Current | 125A |
| Instantaneous Trip Type | C |
| Rated Short-circuit Breaking Capacity | 6KA |
| Rated Impulse Withstand Voltage | 6KV |
| Pollution Level | 2 |
| Protection Level | IP20 |
| Specified Use Temperature | -25 to +65 degrees C |
| Mechanical Life | 10,000 operations |
| Electrical Life | 6,000 operations |
| Remote Control | Smartphone over WiFi or 3G/4G |
| Platform | Tuya SmartLife, Amazon Alexa, Google Home, IFTTT |
Ratings are as published for this model. Where a value is not published we mark it TBC rather than estimating it.
Manufacturing Process
- Moulding and machining of the breaker housing and internal carriers
- Assembly of the thermal-magnetic trip unit and contact system
- Fitting and firmware loading of the WiFi control module
- Calibration of the trip characteristic against the Type C curve
- Routine dielectric and operation testing before packing
Customization Options
- Rated current selected from 16A to 125A per order
- Pole count supplied as 1P, 2P, 3P or 4P from the same series
- ODM branding on housing print and packaging
- Packaging and carton marking to the buyer's own specification
Comparison
How It Compares
| Conventional MCB | Same protection function but adds remote and scheduled switching at a higher unit cost |
|---|---|
| MCB plus separate timer and contactor | One DIN device instead of three, though switching logic then lives in the app rather than in the panel |
| Zigbee smart MCB | Connects straight to WiFi with no gateway, but depends on the site router being up |
Use Guide
- Switch on manually and confirm the breaker holds under normal load before pairing
- Link the device to Alexa, Google Home or IFTTT if voice or scene control is required
- Set timing delay or cycle schedules in the app for automated switching
- Keep the manual handle accessible so the circuit can always be isolated on site
Related Products
Tuya WIFI Smart Circuit Breakers
Smart WIFI electric energy acquisition module
The Smart WiFi Electric Energy Acquisition Module is a two-pole single-phase device for AC 230V circuits that measures...
View Product
Tuya WIFI Smart Circuit Breakers
3P Tuya Smart Wifi Circuit Breaker
The 3P Tuya Smart WiFi Circuit Breaker is a three-pole breaker for AC 400V three-phase circuits that maintains standard...
View Product
Tuya WIFI Smart Circuit Breakers
1P Tuya Smart Wifi Circuit Breaker
The 1P Tuya Smart WiFi Circuit Breaker is a single-pole device for AC 110V/230V circuits that maintains standard...
View ProductWhere It Is Used
Agriculture and Water Pumps
Farms, irrigation lines and pump houses sit away from the people who run them. The smart breaker range switches, times a...
Street Lighting and Municipal Works
Street lighting, municipal works and public buildings run circuits that must switch to a schedule and be recoverable wit...
Related Reading
WiFi Zigbee or 4G Choosing a Smart Breaker Connection
The protection is the same. The difference between the three smart ranges is how the device reaches the person...
A Buyers Checklist for Sourcing Low Voltage Devices
What to ask a supplier before the first order, written from the questions we are actually asked....
FAQ
Questions About the 4P Tuya Smart Wifi Circuit Breaker
What rated currents are available for the 4P version
The series covers 16A, 20A, 25A, 32A, 40A, 63A, 80A, 100A and 125A, with a 125A rack rating.
Does it still protect the circuit if the internet goes down
Yes. Overload, short-circuit and isolation protection are mechanical and work independently of the network. Only remote control needs a connection.
Which app and voice platforms does it work with
It runs on Tuya SmartLife and supports Amazon Alexa, Google Home and IFTTT.
What standards is it built to
GB10963.1 and IEC60898-1, with a Type C instantaneous trip and 6KA rated short-circuit breaking capacity.
Can we have it supplied under our own brand
Yes. We run ODM projects and can print your branding on the housing and packaging. Send us your artwork and the current ratings you need.
What temperature range can it be installed in
The specified use temperature is -25 degrees C to +65 degrees C at IP20 protection, so it belongs inside an enclosure.
What are the minimum order quantity and lead time
Both depend on the current ratings and branding you need. Email [email protected] with your model list and quantities for a current answer.
Get a Quotation for the 4P Tuya Smart Wifi Circuit Breaker
Tell us the ratings, pole counts and quantities you need and we will price this model directly.