Marine Store Group 59
Pneumatic & Electrical Tools
Pneumatic and electric needle scalers, deck scalers, descaling chain machines, portable scaling machines, pneumatic vacuum cleaners, hold cleaning guns, drum pumps and pneumatic winches. This is the core group behind most of the hull and deck preservation work on board.
At A Glance
| Store group | 59 |
|---|---|
| Catalogue items | 14 |
| Typical buyers | Bosuns and chief officers running deck preservation programmes |
| Supplied from | Suzhou, Jiangsu, China |
| Ships with | All other store groups in one consolidated consignment |
Items In This Group
14 Products In Group 59
Who This Group Is For
- Bosuns and chief officers running deck preservation programmes
- Superintendents planning dry dock and riding squad work
- Ship chandlers supplying maintenance campaigns
- Shipyard and tank cleaning contractors
Problems It Solves
- Chipping by hand takes weeks of crew time and still leaves scale behind
- Electric tools brought on board with the wrong voltage and frequency for the ship's supply
- Dust and scale spread through accommodation because there is no shipboard vacuum
- Cargo holds failing inspection after a dirty previous cargo
- Tools that cannot be serviced because no spare needles or chains were ordered
What You Get
- Surface preparation completed in a fraction of the time hand chipping takes
- Voltage and frequency options published per code so the tool matches the ship's supply
- Pneumatic options where an electrical tool is not appropriate
- Hold cleaning guns that reach up to 20 metres with a high pressure water flow
- Consumable parts kept on the same requisition as the machine
Why Buy This Group From Us
- Air consumption, blows per minute and supply pressure stated on the manufacturer sheets
- Both pneumatic and electric versions of the main tool families
- Matched couplings and hoses available in group 35
- Consumables and PPE ordered together with the tool
Application Scenarios
Where Group 59 Items Are Used On Board
Deck, hatch coaming and bulwark descaling
Ballast and cargo tank surface preparation
Cargo hold cleaning between grades
Engine room and workshop maintenance
Related Reading
Solutions Industries And Guides Linked To This Group
Solution
Hull And Deck Descaling
IndustryContainer And General Cargo Ships
Product GuideHow IMPA Codes Work For Marine Store Ordering
Other Store Groups
Answers
Pneumatic & Electrical Tools Questions
How do I choose between a needle scaler and a deck scaler
A needle scaler works into corners, welds, edges and around structure. A deck scaler covers large open flat areas quickly. Most vessels carry both.
Should I order pneumatic or electric
Pneumatic tools suit locations where service air is already run and where an electrical tool is not appropriate. Electric tools suit locations with a suitable supply. Both versions are listed.
What voltage options are available
The manufacturer sheets list 110-120 VAC and 220-240 VAC options at 50/60 Hz against separate codes. Confirm the ship's supply before ordering.
What can the hold cleaning gun be used for
The manufacturer sheet states it can be used to clean bulk cargo cabins and that the high pressure water flow can remove unconsolidated rust, oil paint and residue within 20 metres, with the joint chosen to suit the demand.
Do you supply spare needles and chains
Yes. Consumable parts are ordered on the same requisition as the machine.
Next Step
Need A Quotation For Group 59
Send the item codes or just the descriptions. We will match them to the catalogue and quote.